Hermida Audio Technology Zendrive Quick Start Manual
Text of the manual
© 2009 Hermida Engineering, Inc. · All Rights Reserved · www.hermidaaudio.com · [email protected]
Modified 11/25/09
Introduction
This guide describes the following pedals in the Hermida Audio Technology line:
• Zendrive
• Zendrive 2
• Mosferatu
• Distortion
• Nu-Valve
• Dual Boost
• Reverb
Zendrive, Zendrive 2, Mosferatu, Distortion
Hermida Audio Technology Pedal Quick-Start Guide
Page 2 of 5
Knob Functionality
1. Vol(ume) - Adjusts the overall volume of the unit. The fully counterclockwise
position is zero.
2. Gain - Adjusts the amount of gain in the unit. For cleaner settings, rotate
counterclockwise. The maximum gain in the pedal is also limited by the Voice knob
settings. To set the
Hermida Audio Technology Pedal Quick-Start Guide
Page 3 of 5
Pedals with Tubes: Zendrive 2 and Nu-Valve
Zendrive 2
The Zendrive 2 (Diagram B) is a variation of the original
Zendrive with the addition of a dual triode pre-amp tube. The
tube is installed in a socket and can be replaced with other pre-
amp tubes. Different tubes can change the voicing and gain
Hermida Audio Technology Pedal Quick-Start Guide
Page 4 of 5
Dual Boost Pedal
The Dual Boost pedal (Diagram D) offers two distinct clean gain
levels selectable by a footswitch.
The Dual Boost has the following configuration:
1. Gain A, Gain B, Tone and Voice knobs
2. In/ Out jacks
3. 9V DC adapter jack
4. Status On/ Off LED and Gain A and Gain B LED indicato
Hermida Audio Technology Pedal Quick-Start Guide
Page 5 of 5
Reverb Pedal
The Reverb pedal (Diagram E) offers a simple and
effective way to add reverb to your favorite amplifier.
The Reverb has both analog and digital signal paths in
order to maintain the warmth and response of the
original signal. Both signals are mixed together and sent
to the output of th