HEPRO Tilto Operating Instructions

Text of HEPRO Tilto Operating Instructions

HEPRO AS •

Tlf. +47 756 94700 • www.hepro.no Hepro Tilto work chair With gas lift or electric lift Please read this operating instruction carefully! Tested and in conformance with the following norms and guidelines: EN 12182 EN 1021 – 1 EN 1335-1, 2, 3 EN 1021 – 2 EN ISO 14971 EN 60601-1-2
HEPRO AS • Tlf. +47 756 94700 • www.hepro.no Intended use Hepro Tilto work chair is designed to help people with disabilities that make it difficult for them to execute an activity in an upright position, and at the same time have problem with movement during the activity. The chair has big levers with clear symbols and can be easily adjusted to fit ergonomically while simultaneously taking into account the body`s mov
HEPRO AS • Tlf. +47 756 94700 • www.hepro.no Adjusting the armrest Armrest pad can easily be pushed forward or back. The height is regulated by holding up the outer mantle and then move the armrest to desired position. The whole armrest can be folded back by pressing the plastic latch at the bottom. Regulating the seat unit For models with gas lift: • To regulate the height lift the lever I. For models with electr
HEPRO AS • Tlf. +47 756 94700 • www.hepro.no Regulating the brake handle The brake handle can be moved sideways by opening the eccentric fastener and move the handle so it fits. It can also be moved to the other side. The position is locked by closing the eccentric fastener. If it does not lock well enough, there is a tension screw just above the lock, which can be tightened gently with a 3 mm Unbraco key. Cleaning Th

HEPRO Indoor Furnishing Owners Instructions: