IFM efector 200 OGS38 Series Operating Instructions

The through-beam sensor detects objects and materials without contact and indicates their presence by a switching signal. For the range see the type label. 2 Installation ►Install the receiver (OGE38x) and secure it to a bracket. ►Align the transmitter (OGS38x) to the receiver and secure it also to a bracket. > Maximum range o ...

pin 3 = L- pin 4 = load (PNP, 200 mA) (pin 2 = not connected) NPN      pin 1 = L+ (10...30 V DC) pin 3 = L- pin 4 = load (NPN, 200 mA) (pin 2 = not connected) 4 Operation Check whether the sensor operates correctly. • Receiver (OGE38x): The yellow LED is lit when the switching ouptut is swit- ...