IDTECH MiniSmart II Operation & User’s Manual
Read Online
Read the IDTECH MiniSmart II Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
Tel: (714) 761-6368 Fax (714) 761-8880 www.idtechproducts.com [email protected] MiniSmart II Secure Smart Card Reader User Manual 80161502-001 Rev. C 1 October 2019 ...
Page | 2 ID TECH 10721 Walker Street, Cypress, CA90630 Voice: (714) 761-6368 Fax: (714) 761-8880 ID TECH, Inc. All rights reserved The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, ID TECH is not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage, nor for any infringements or pa ...
Page | 3 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly ...
Page | 4 Table of Contents 1. INTRODUCTION .................................................................................................................................................................................. 5 2. PRODUCT CONFIGURATIONS ........................................................................................................................................................ 5 3. FEATURES .................. ...
Page | 5 1. Introduction The MiniSmart II is ID TECH’s EMV-ready, smart card interface that is certified for EMV Level 1 and Level 2. The MiniSmart II maintains a compact form factor and supports interfaces such as USB, UART, and RS-232. The MiniSmart II has smooth integration abilities that adapts well for EMV transactions and fills the need for a compact, reliable card reader that can serve a wide variety of space-limited appli ...
Page | 7 1. Size and Weight: • Main Body size: 66.0mm(L) x 33.2mm(W) x 6.6mm(H) • Weight: 13.40g 2. Mounting Method: • Four mounting holes • Insertion installation through 2 side edges of PCA board 3. Module Interface: • FPC cable to connect terminal • RS-232 adapter connects to terminal through cable • USB adapter connects to terminal through cable Connections Smart Card Connector • Model type: Amphenol-M- ...
Page | 8 Environmental Temperature Operating: 32°F to 131°F (0°C to 55°C) non-condensing Storage: -22°F to 149°F (-30°C to 65°C) non-condensing Humidity Operating: maximum 95% non-condensing Storage: maximum 95% non-condensing Electrical Electrical Power Requirements: 4.5 VDC to 5.5 VDC, 12mA Max. w/no ICC ICC Interfaces (Compliance): ISO/IEC 7816-1, 2, 3, & 4 ICC Types: Number of cards = 1, Asynchronous, T=0 & T=1 Synchron ...
Page | 9 6.2. Communication Interface PCs and laptops can communicate with the MiniSmart II through the USB interface or the RS- 232 interface. An Android device uses USB and a PC might use either USB or RS-232. 6.3. Connector Interface 6.3.1. FPC Interface FPC Header Spec: 8PIN, 1.0mm pitch, length 3.0mm, thickness 0.3mm Pin out: 1 TXD 2 RXD 3 GND 4 USB_DP 5 USB_DM 6 GND 7 +5v 8 Earth_GND ...
Page | 10 6.3.2. USB and no FPC USB Connector: Molex; 53261-0471 USB Connector Specifications: 4PIN, 1.25mm pitch Pin out: 1 +5V 2 USB_DM 3 USB_DP 4 GND 6.3.3. RS-232 and no FPC RS-232 connector: Cherng-Weei Technology Corp.; CCSH-W10R-05-TR RS-232 connector spec: 5PIN, 1.0mm pitch ...
Page | 11 Pin out: 1 +5V 2 TXD 3 RXD 4 GND 5 Earth_GND 7. Interfaces 7.1. Smart Card Function • EMV 2000 Level 1 & 2 compliant (EMV-ready). • Reads ISO 7816 (1,2,3,4) (T=0, T=1) (Class A, B, C) microprocessor cards. • Monitors card seated status. • TDES and AES Enhanced Encryption Format supported. 7.2. Serial Interface • RS-232 interface for communication with PC host. (Can communicate with Android host via MicroUSB.) � ...
Page | 12 7.4. Remote Key Injection Function • Compatible with Local POS Computer (LPC) for Debit and Data Key Injection. • Can communicate with Local POS Computer (LPC) via RS-232 port. • Can communicate with Local POS Computer (LPC) via USB port. 7.5. Bootloader Function The firmware can be upgraded via RS-232 or USB port in the field. The unit does not need to be sent back to the manufacturer. 8. APIs 8.1. Set Idle Waiting ...
Page | 13 9. Universal SDK ID TECH's Universal SDK supports MiniSmart II development in C# on Windows and Java on Android. Contact an ID TECH representative for free access to the SDK of choice. ID TECH recommends the use of these SDKs to achieve rapid integration of MiniSmart II with tablets, POS systems, mobile devices, electronic cash registers, and more. The Universal SDK is designed to provide easy high-level access to virtual ...
