iCeeO2 500 Instruction Manual

Text of iCeeO2 500 Instruction Manual

Product may vary from picture.

 To ensure safety, please read this manual carefully before installation and follow the instructions herein.  Store this manual in a secure place for future reference  WARNING: CHOKING HAZARD - Accessories contain small parts  Printed by color ink, water will smudge Getting Started ................................... 2 Package Contents ..................

Hello there! Congratulations on your new iCeeO2 product! Our products are

packaged and shipped with the utmost care. In the unlikely event that your item is incorrect, incomplete, or unsatisfactory, please contact us and we will see to fix it immediately. Feel free to contact us at www.iCeeO2.com; [email protected] . Package Contents CO2 Monitoring Unit Micro USB Cable for power AC adapter

1. CO2 Chart

2. Max Reading of Chart 3. Min Reading of Chart 4. CO2 Reading 5. Main Menu 6. Plant or Human mode 7. Audible Alarm On/Off 8. CO2 status display 9. Time per Division – indicates the chart’s time per unit division 10. Good Zone Indicator Trend Chart The trend chart (1) displays the past readings for CO2 and temperture parameters. . That can be toggled by using DOWN key: CO2, TEMP

Trend Chart Zoom

Below is a table that show the available Zoom Levels for all parameters, as well as the duration of each division for corresponding Zoom Levels: Zoom Level (Time Span) (9) Time Per Division 1MIN (minute) 5sec /div 1HR (hour) 5m/div 1Day (day) 2h/div 1WEEK(week) 0.5d/div Using UP will toggle the available Zoom Levels for each parameters. Note that in addition to the Zoom Levels for each param

Main Menu Functions

The Main Menu (5) functions can be toggled through by using MENU. If the main menu is not brought up, the green bar will remain blank, leaving the UP / DOWN buttons to toggle between parameters and Zoom Levels, respectively. Pressing MENU once will bring up the main menu, with a flashing bar indicating the current choice. To select the function, press ENTER when the bar flashi

By default , an audible alarm will resound if the CO2 level exceeds

varying levels in Plant Mode (depending on the plant selection) or 1000ppm in Human Mode. Once ALARM is selected (by pressing ENTER), use either UP or DOWN to toggle the selection from ON to OFF or vice versa. Press ENTER one more time to confirm. A regular bell icon will be displayed if alarm is on; a silenced bell

Typical test conditions, unless otherwise specified: Ambient Temp =23+/-3°C,

RH=50%-70%, Altitude=0~100 meter Measurement Spec Operating Temperature 32°F to 122°F (0°C to 50°C) Storage Temperature -4°F to 140°F (-20°C to 60°C) Operating & Storage RH 0-95%, non-condensing CO2 Measurement Accuracy at 0~3000ppm ±50ppm or ±5% of reading, whichever is greater Accuracy over 3000ppm ±

iCeeO2 Measuring Instruments Owners Instructions: