Icare ic200 Manual 

Pressing the Select button to start Pressing the Measure button to start Ready to measure. Eye side selection: OD, no information, OS. 1. Press the Select or Measure button to turn the tonometer on. Illustrations of these alternative ways of starting: (Remember to use the wrist strap) 2. Open the probe tube b ...

Indicates a correct single measurement. DOUBLE BEEP Indicates an incorrect single measurement. (See error messages from full manual). LONG BEEP Indicates that six succesful measurements are done and IOP result is available at the display. REPEAT mmHg mmHg mmHg mmHg mmHg mmHg 1.10 1.11 1.12 1.13 1.15 12 12 1.14 1.16 1.17 1.18 23.9 20.8 16.5 17. ...

REPLACING THE PROBE BASE 1. Turn power off from the tonometer. 2. By hand, unscrew the probe base collar and place it in a safe location. 3. Pull the probe base out of the tonometer using thumb and fingers. 4. Insert a new probe base into the tonometer. 5. Screw the collar down until i ...