ESAB EMP235ic Instruction Manual

Valid for: serial no. 821-xxx-xxxx EMP 235ic Multi-Process Welding Inverter ...

0463 641 001 © ESAB AB 2018 1 SAFETY ....................................................................................................... 5 1.1 Meaning of symbols............................................................................... 5 1.2 Safety precautions ....................................................................... ...

0463 641 001 © ESAB AB 2018 7.4 Torch and liner maintenance................................................................. 31 8 TROUBLESHOOTING................................................................................. 32 9 ORDERING SPARE PARTS ........................................................................ 34 DIAGRAM .... ...

- 5 - © ESAB AB 2018 1 SAFETY 1.1 Meaning of symbols As used throughout this manual: Means Attention! Be Alert! DANGER! Means immediate hazards which, if not avoided, will result in immediate, serious personal injury or loss of life. WARNING! Means potential hazards which could result in personal injury or loss of life. CAUTION! Means ...

- 6 - © ESAB AB 2018 4. Personal safety equipment: ○ Always wear recommended personal safety equipment, such as safety glasses, flame-proof clothing, safety gloves ○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which could become trapped or cause burns 5. General precautions: ○ Make sure the return ca ...

- 7 - © ESAB AB 2018 MOVING PARTS - Can cause injuries • Keep all doors, panels and covers closed and securely in place. Have only qualified people remove covers for maintenance and troubleshooting as necessary. Reinstall panels or covers and close doors when service is finished and before starting engine. • Stop engine before inst ...

- 8 - © ESAB AB 2018 2 INTRODUCTION The ESAB EMP product family is a new generation of MIG and Multi-Process (MIG/MMA/TIG) welding power sources. The EMP 235ic power source is designed to match the needs of the light-medium fabrication user. It is tough, durable and portable, providing excellent arc performance across a variety o ...

0463 641 001 - 9 - © ESAB AB 2018 3 TECHNICAL DATA EMP 235ic, 230 V Voltage 230 V, 1~ 50/60 Hz Primary current Imax. GMAW - MIG 32.1 A Imax. GTAW - TIG 24.9 A Imax. SMAW - MMA 31.2 A Ieff. GMAW - MIG 14.6 A Ieff. GTAW - TIG 14.7 A Ieff. SMAW - MMA 14.7 A Permissible load at GMAW - MIG 100% duty cycle 130 A / 20.50 V 50% duty cycle 170 A / 2 ...

0463 641 001 - 10 - © ESAB AB 2018 EMP 235ic, 230 V Dimensions l×w×h 686 × 292 × 495 mm (27.0 × 11.5 × 19.5 in.) Weight 28.6 kg (63 lb) Operating temperature -10 to +40 °C (+14 to +104 °F) Enclosure class IP23S Application classification EMP 235ic, 120 V Voltage 120 V, 1~ 50/60 Hz Primary current Imax. GMAW - MIG Break ...