Emerson ER107001 Owner's Manual

and Indoor Chime with Two-Way Audio, Motion-Activated Alerts and Night Vision for IOS and Android App OWNER’S MANUAL ER107001 Visit our web site at www.emersonradio.com UNAUTHORIZED MODIFICATIONS TO THIS DEVICE COULD VOID MANUFACTURER’S WARRANTY guides.c ...

Google Play Store. -1- 2. Device Overview Infrared LED Camera Image Sensor Microphone Speaker Call Button Reset Button Power OFF/ON Switch Micro SD Card Slot WiFi Signal Indicator PIR Motion Sensor Battery Charging Indicator Photodiode 1.Package Contents USB Charging Slot Doorbell Mounting Plate Chime USB C ...

device, please refer to section 5. TM 1. Fully charge the doorbell by plugging it into a power source with the USB cable provided. The indicator light will become steady blue once fully charged (Please refer to Section 2). 2. Power On, then open the App and tap "+" 4 .Follow the in-app instruction ...

(2.4 GHz Wifi only). 8.Enter Wifi password and tap "OK" to proceed. 6. Please wait until the connection to "Wifi_Doorbell_AP" is successful. Then go back to Emerson Doorbell App to continue. 9. Enter the password of device and tap OK (default password is admin ). " " " " 10. Please go to Sectio ...

TM This section is for Android device only. For iPhone, please refer to section 4. 1. Fully charge the doorbell by plugging it into a power source with the USB cable provided. The indicator light will become steady blue once fully charged (Please refer to Section 2). 5. Follow the in-app instructions . ...

your password. This device works with multiple users. Once this device has been added to the first user, there are several options for the subsequent users to add the device (Please refer to Section 6). Note: 7. Please wait until there is pop-up for the password of device. Enter the p ...

Note: Default password is "admin" but it may be changed by the first user. Please check and confirm the password first. Option 2: Tap "Scan QR Code" and scan the QR code label on back of the doorbell. Enter password and tap "OK". Note: Default password is admin but it m ...

b. Device ID (For information only, cannot be changed) c. Modify password (any characters or numbers and 4-16 in length) Noted: please alert other users after change of password d. Upgrade firmware(Tap to upgrade) e. Micro SD Card Record (Pictures by motion detection will be saved here. There is no opti ...

Chime is an optional add-on that alerts you when your doorbell rings even if your phone is off or not in use. 1. Press (3) to select ringtone 2. Press (2) to set volume 3. Chime is already paired with the doorbell. The followin ...

image Noted: Switch off this function can improve audio quality. 10. Hardwiring and Installation USB Charging Slot Charging Connector Base Reset Button OFF ON Micro SD card slot Power OFF/ON (AC 8V 24V) ~ Intercom Interface: -17- -18- Photos saved in smartphone. Videos saved in smartphone. Photos by motion detection saved in Micro SD card. H ...