Festo CPX-FB13 Manual 

I-Port 574601 1411a [8041791] Electrical interface CPX‐CTEL‐4‐M12‐5POL Terminal CPX all-guides com ...

2 Festo – P.BE-CPX-CTEL-EN – 1411a – English Translation of the original instructions P.BE-CPX-CTEL-EN IO-Link® and TORX® are registered trademarks of the respective trademark owners in certain countries. Identification of hazards and instructions on how to prevent them: Warning Hazards that can cause ...

Festo – P.BE-CPX-CTEL-EN – 1411a – English 3 Table of Contents – Electrical interface CPX‐CTEL‐4‐M12‐5POL 1 Safety and requirements for product use 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Safety 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

4 Festo – P.BE-CPX-CTEL-EN – 1411a – English 4.2 Procedure for commissioning 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Preparing the CTEL system for commissioning 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1 Ch ...

Festo – P.BE-CPX-CTEL-EN – 1411a – English 5 Instructions on this documentation This description contains specific information on the mode of operation, mounting, installation and commissioning the Festo CTEL master module. A list of other descriptions on the components of the CPX or CTEL system as well ...

6 Festo – P.BE-CPX-CTEL-EN – 1411a – English 1 Safety and requirements for product use 1.1 Safety 1.1.1 General safety information � Observe the general safety information in the corresponding chapters. Specific safety regulations can be found immediately before the task instructions. Note Damage to the produ ...

Festo – P.BE-CPX-CTEL-EN – 1411a – English 7 1.2 Requirements for product use 1.2.1 Technical prerequisites General notes for the correct and safe use of the product, which must be observed at all times: � Comply with the connection and environmental conditions specified in the technical data of the product ( ...

8 Festo – P.BE-CPX-CTEL-EN – 1411a – English 2 System overview, CTEL system 2.1 Overview CTEL system Festo can assist you in solving your automation task at the machine level with the aid of valve terminals and I/O modules. The CTEL master module from Festo permits connection of devices with an I-port interface (I-port de ...

Festo – P.BE-CPX-CTEL-EN – 1411a – English 9 2.1.1 Mode of operation of the CTEL system CTEL systems are composed of the following modules: Modules Functions CTEL master – Are components of a CPX system and serve as gateway between CPX and I-port modules. – Provide connections for up to 4 valve terminals or I/O module ...

10 Festo – P.BE-CPX-CTEL-EN – 1411a – English Each CTEL master module controls the data transfer to the decentralised I-port I/O-modules in a CPX terminal. In principle, several CTEL master modules can be placed in a CPX terminal. The number of CTEL master modules that can be placed in a CPX terminal is limited by the ava ...