Chago Wallbox EVB100 Installation Instruction

1 ENG RAK 111 20.10.2016 Chago Wallbox Installation instruction Operation instruction all-guides com ...

3 2. Safety Instructions 3 3. Delivery Contains 4 4. Accessories 4 5. Installation instructions 5 5.1. Before Installation 5 5.2. Wall Bracket Installation 6 6. Supply Connection  9 7. Commissioning 10 7.1. Connecting to Chago Wallbox 10 7.2. Configurating to Chago Wallbox 11 7.3. Commissioning Standalone Charging Poin ...

Ambient light (optional) Painted steel frame RFID reader 1. Chago Wallbox EVB100: Single charging unit EVB200: Dual charging unit 2. Safety Instructions • Chago Wallbox must be installed by a qualified person. • Read this instruction manual before ...

• Chago Wallbox (EVB100 / EVB200) • Installation and Operation instruction • Optionally Wall bracket (EVTL40.00) 4. Accessories Wall bracket EVTL40.00 Included on Wallbox configurations EVBx00-A/-B/-C/-D. For other configurations please order separately. 300 45 20 25 2x Ø6 240 4x Ø7 431 241 260 200 43 320 20 320 65 452,6 429 43 ...

Note! Cable glands are not included in the delivery. Please order suitable cable glands separately according to the used supply cable sizes, for example Ensto KTM... cable gland series (polyamide or brass). 5. Installation instructions 5.1. Before Installation Remove the Wallbox from it’s package. Do not scratch ...

bracket. • Place the wall bracket on the wall using suitable screws. min. 400 mm min. 200 mm Recommendation 1200 mm 5.2. Wall Bracket Installation Follow always national regulations and site requirements all-guides com ...

and remove the front cover. Note! RFID, LED module and 3G antenna cables are attached to the front cover. Be careful not to break any components when you remove the front cover. Step 3 • Place the Wallbox on the wall bracket (1). • Attach the top of the Wallbox on the wall bracket using the screws included in the pa ...

• Remove the flange at the bottom of the Wallbox frame. • Open the knock out needed for the cable gland. • Put the cable gland in place. • Put the flange in place. • Pull the supply cable through the cable gland approx. 600 mm. • Remove the cable sheath ...

The voltage and current ratings including cables and line protector dimensioning must comply with na- tional regulations. System dimensioning must be done by a qualified electrical designer. Connect separate supply cables for each charging outlet. Stranded cables are recommended in Wallbox installations. A Residual current protection ...

By default all Chago Wallboxes are operating in free charging mode (standalone operation). In this free charging mode external communication (Ethernet, 2G/3G) is not active. If the Chago Wallbox is going to be connected to some back-office ...