Aerogen Pro System Instruction Manual

1 Contents Introduction 2 Indications for Use 2 System Warnings 5 Assembly & Installation 9 Installation For Use With A Ventilator 12 Nebulisation 16 Installation For Use Off-Ventilator 17 Functional Test 19 Cleaning, Disinfection and Sterilisation 20 Troubleshooting 26 Warranty 28 Life Of Product 28 Specifications 29 ...

use that is intended to aerosolise physician-prescribed medications for inhalation that are approved for use with a general purpose nebuliser. This device can be used by patients on and off mechanical ventilation or other positive pressure breathing assistance ...

3 Aerogen Pro System The Aerogen Pro System includes the following components: Figure 1.  Aerogen Pro System 1. Nebuliser with Filler Cap 2. T-Piece (Adult) with Plug 3. Aerogen Pro Controller 4. Controller Cable 5. AC/DC Adapter 6. Universal Mounting Bracket & Equipment Mount Adapter Note:  Visit www.aerogen ...

is translucent to allow visual monitoring of medication levels and aerosolisation. When the nebuliser is connected into the breathing circuit, the filler cap can be opened or removed from the nebuliser without causing loss of circuit pressure. Within the nebuliser is the Aero ...

5 System Warnings Read and study all instructions before using the Aerogen Pro System and accessories. Only trained medical personnel should operate the device. During use observe for correct functioning of the nebuliser by regularly verifying aerosol is visible and no flashing indicator lights. Do not use a filter or ...

cracked or damaged. In case of missing parts, malfunction or damage, contact your sales representative. Do not immerse or autoclave the controller or AC/DC adapter. Disassemble all parts before autoclaving. Use only with components specified by Aerogen. Do not use or store out ...