ABB ACS580MV Hardware Manual

You can find manuals and other product documents in PDF format on the Internet. See http://www.abb.com/motors&drives. For manuals not available in the Document library, contact your local ABB representative. For more information, please refer to ACS580 MV Hardware Manual which can be found by scanning the QR code below. Drive hardware manuals and guides Code (English) ACS580MV hardware manual 2UBB004520 ACS-AP-X assistant control pa ...

6 kV to 11 kV 2UBB004520 Rev E EN EFFECTIVE:2019-06-27  2019 ABB Beijing Drive Systems Com- pany Ltd, All Rights Reserved. Electrical installation Table of contents Operation Safety instructions Mechanical installation Transportation, storage and disposal Maintenance ...

Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1. Safety instructions Contents of this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 User’s responsibilit ...

Charging circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Discharging the power modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Preparing cabinets for storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Storage and handling instructions for spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Reforming capacitors of the power modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Dis ...

Control and power supply cables for fan units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Sealing holes in entry plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Final checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Cleaning the interior of the cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Replacing the door air filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Cleaning heat sinks of power modules . . . . . . . . . . . . . . . . . . . . . . ...

Terms The following table lists the terms and abbreviations you should be familiar with when using the manual. Some of the terms and abbreviations used in the manual are unique to ABB and might differ from the normal usage. Term / Abbreviation Meaning BCU Control unit used for controlling drives, inverters and converters via fiber optic links. Converter Short form for ACS580MV frequency converter. COU Control unit Short form for con ...

designated as such. The absence or presence of such a designation should however not be regarded as an offence of the legal status of any trademark. The following registrations and trademarks are used in this manual: PCC Point of Common Coupling. The PCC is the point in the electrical power supply system where the responsibility of the utility changes to the ind ...

1 Safety instructions Contents of this chapter This chapter contains the safety instructions which you must obey when you install and operate the drive and do maintenance on the drive. If you ignore the safety instructions, injury, death or damage can occur. Safety instructions are used to highlight a potential hazard when working on the equipment. Safety instructions must be strictly followed! Non-compliance can jeopardize the saf ...

• ANSI Z535.6 American National Standard for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials User’s responsibilities It is the responsibility of those in charge of the drive to ensure that each person involved in the installation, operation or maintenance of the drive has received the appropriate training and has thoroughly read and clearly understood the instructions in this manual a ...

Possible residual risks The following risks can arise from a drive system and pose a hazard to people. These risks must therefore be taken into account by the system integrator and / or the plant owner when assessing the risks of the machinery. • Electric power equipment generates electro-magnetic fields which can cause a hazard to people with metal implants and / or a pacemaker. • Drive system components can move unintentional ...

Safety labels Safety labels are attached to the cabinet where necessary to alert personnel of potential hazards when working on the equipment. The instructions on the safety labels must always be followed, and the labels must be kept in a perfectly legible condition. General safety in installation, start-up and maintenance These instructions are for all personnel that install the drive and do maintenance work on it: • If you sele ...

Electrical safety in installation, start-up and maintenance  Precautions before electrical work These warnings are for all personnel who do work on the drive, motor cable or motor. Obey these instructions. If you ignore them, injury or death, or damage to the equipment can occur. If you are not a qualified electrician, do not do installation or maintenance work. Go through these steps before you begin any installation or mainten ...

5. Measure that the installation is de-energized. • Use only instrumentation (e.g., meters, oscilloscopes, etc.) intended for high voltage measurements. 6. Always discharge equipment and verify that it is neither electrically alive nor thermally hot. 7. Always install temporary grounding as required by the local regulations. 8. Ask for a permit to work from the person in control of the electrical installation work.  Additional ...

2 Introduction to the manual Contents of this chapter This manual documents the operation, maintenance and troubleshooting of the ACS580MV medium voltage drive. This manual and parts thereof must not be reproduced or copied, or disclosed to third parties, nor used for any unauthorized purpose without written permission from ABB Beijing Drive Systems Company Ltd. The hardware and software described in this manual is provided ...

eventualities that may arise during installation, commissioning, operation and maintenance of the drive. If the drive is adapted to specific customer needs or applications, and handling, installation, and operation of the drive are affected by these modifications, information on these modifications is provided in the appropriate documentation (e.g. outline drawings, wiring diagrams, technical data, engineering notes). If inf ...