4B IE-NODE Series Operation Manual
Text of the manual
INDUSTRIAL ETHERNET NODE 1
8 CONTACT/NTC TEMPERATURE INPUTS &
2 PULSED/4-20 mA INPUTS
COMMUNICATION PROTOCOLS -
PROFINET, ETHERNET/IP & MODBUS TCP/IP
INSTALLATION INSTRUCTIONS
OPERATION MANUAL
Part No.’s - ETH-NODE1V46CAI, ETH-NODE1V4CAI
Hardware Version R4 - Software Version 4.1.X - Ethernet 00.02.XX
Exposed buckets and
moving parts will cause
severe injury or death.
Lockout power before
removing cover or
inspection door.
DANGER
Moving parts can
crush and cut.
Lockout power before
removing guard or
servicing.
Do NOT operate with
guard removed
WARNING
1. CUSTOMER SAFETY RESPONSIBILITIES
Page 4 - 5
2. PRODUCT OVERVIEW
Page 6
3. SPECIFICATIONS
Page 6
4. APPROVALS
Page 7
5. DIMENSIONS
Page 8
6. INSTALLATION
Page 8
7. SENSOR PLACEMENT DIAGRAMS
Page 9
8. ELECTRICAL CONNECTION
Page 10
9. WIRING DIAGRAMS
Page 12 - 16
9.1 Supply Voltage Wiring (120 to 240 VAC)
Page 12
9.2 Supply Voltage Wiring (24 VDC)
Pa
Dear 4B Customer:
Congratulations on your purchase. 4B appreciates your business and is pleased you have chosen our
products to meet your needs.
Please read in its entirety and understand the literature accompanying the product before you place the
product into service. Please read the safety precautions carefully before operating the product. With ea
3. SELECT A QUALIFIED AND COMPETENT INSTALLER
Correct installation of the product is important for safety and performance. If you have not asked 4B to
perform the installation of the unit on your behalf, it is critical for the safety of your operation and those
who may perform work on your operation that you select a qualified and competent electrica
2. PRODUCT OVERVIEW
The Industrial Ethernet Node 1 (IE-NODE) is a remote sensor monitoring device designed to work alongside
a PLC or other control systems. The unit has 10 total sensor inputs - 8 shared contact or NTC temperature
inputs, and 2 configurable pulse or 4-20 mA (current loop) inputs.
However, the IE-NODE can be expanded up to 16 sensor inputs
ETH-NODE1V46CAI Approvals Information
CSA
Class II, Division 2, Groups F and G T130°C
Tamb: -20°C to +50°C
ATEX
Baseefa11ATEX 0033X
Ex II 3D Ex tc IIIC T125°Dc IP66
TAMB -20°C to +45°C
IECEx
IECEx BAS11.0018X
Ex tc IIIC T125°Dc IP66
TAMB -20°C to +45°C
ETH-NODE1V4CAI Approvals Information
CSA
Class II, Division 2, Groups F
The IE-NODE should be installed in an area with network Ethernet access.
ENCLOSURE INSTALLATION -
1. Use the correct cable, glands and sealing arrangement in accordance with all installation codes.
2. Where other certified components are used as part of the assembly or installation procedure, the
user must take in to acco
7. SENSOR PLACEMENT DIAGRAMS
1
2
2
3
3
4
1
2
2
3
3
SPEED MONITORING
Qty 1 - One sensor located on either
side of the tail or boot shaft.
BEARING TEMPERATURE
Qty. 4 - One sensor for the bearings
at each end of the drive and tail or
head and boot shafts.
BELT MISALIGNMENT
Qty. 4 - Sensors work in pairs, one
for each side of the belt on the drive
and tail or he