Delta OHM HD2304.0 Manual 

can bring about differences between the information written in this manual and the instrument that you have purchased. We cannot entirely exclude errors in the manual, for which we apologize. The data, figures and descriptions contained in this manual cannot be legally ...

2. Battery symbol: displays the battery charge level. 3. Function indicators. 4. Secondary display line. 5. DATA/ENTER key: during normal operation displays the maximum (MAX), the minimum (MIN) and the average (AVG) of current measurements; in the menu, confirms the current selection. 6. CLR ...

1. GENERAL CHARACTERISTICS ............................................................................................................................. 5 2. DESCRIPTION OF THE FUNCTIONS .................................................................................................................... 6 3. MENU ................. ...

The Manometer - Thermometer Model HD2304.0 is a portable instrument that allows measurement of absolute, relative and differential pressure, and temperature. The PP471 electronic module is used to measure the pressure. The module works as an interface between the instrument and the TP704 and TP705 series Delta Ohm probe ...

The keyboard of the Manometer – Thermometer Model HD2304.0 is composed of double-function keys. The function on the key is the "main function", while the one above the key is the "secondary function". When the instrument is in standard measurement mode, the main function is active. Once the Settings Menu has been ...

CLEAR (CLR): allows to reset the maximum (MAX), minimum (MIN) and average (AVG) value of the captured measurements; ESC: once the MENU has been opened with the DATA+UNIT keys, the CLR key will allow to cancel the parameters set using the  and  arrows. The "DATA" key is used for the following functions: DA ...

UNIT: by pressing this key the unit of measurement of the input probe is selected: the unit of measurement will appear in the upper part of the display; the measured value will be displayed in the central line. By repeatedly pressing the UNIT key, the desired unit of measurement can be selected ...

Menu: Probe type: the "PRBE_TYPE" message is displayed in the comment line. The main line in the center of the display shows the type of probe connected to the instrument. The following probes can be connected to the input: TP704 and TP705 pressure probes combined with the PP4 ...

The instrument measures absolute, relative and differential pressure using the PP471 SICRAM module and the TP704 and TP705 series probes. It also measures the temperature with a Pt100 sensor fitted with SICRAM module, or with direct 4 wire Pt100 probes. The SICRAM module acts as an interface between the sensor on the pr ...