Aruba Mobility Master Installation Manual

Attn: General Counsel 3000 Hanover Street Palo Alto, CA 94304 USA Phone: 408.227.4500 Fax 408.227.4550 Mobility Master Hardware Appliance | Installation Guide Revision 02 | October 2017 Copyright Copyright Information© Copyright 2017 Hewlett Packard Enterprise Development LP. Open Source Code This product includes code licensed under the GNU General Public License, the GNU Lesser General Public Lice ...

| 3 Contents Preface...................................................................................................... 5 Guide Overview.........................................................................................................5 Related Documentation...........................................................................................5 Contacting Support .................. ...

Operating Altitude ...........................................................................................23 Regulatory Model Name........................................................................................23 Safety and Regulatory Compliance ......................................................................23 Electromagnetic Interference................................... ...

Preface | 5 Preface This document describes the hardware features of the Aruba Mobility Master hardware appliance. It provides a detailed overview of the physical and performance characteristics of each appliance model and explains how to install the appliance and its accessories. Guide Overview  Chapter 1, “Mobility Master Hardware Appliance” on page 7 provides a detailed hardware overvi ...

Mobility Master Hardware Appliance | 7 Chapter 1 Mobility Master Hardware Appliance The Aruba Mobility Master hardware appliance manages, controls and intelligently integrates wireless Access Points (APs), Managed Devices and Air Monitors (AMs). The Mobility Master hardware appliance includes the following models: The Mobility Master hardware appliance has the following port configuration: Packa ...

Aruba Mobility Master Hardware Appliance | Installation Guide Mobility Master Hardware Appliance Components This section introduces the component and its location in the Mobility Master hardware appliance. Figure 1 shows the front panel of the Mobility Master hardware appliance and Figure 2 shows the back panel of the Mobility Master hardware appliance. Figure 1 Front Panel of the Mobility Master Hardware Appliance F ...

Mobility Master Hardware Appliance | 9 The following table show the LED indicators and the corresponding status: 10GBase-X (SFP+) Ports The Mobility Master hardware appliance is equipped with two 10GBase-X (SFP+) data ports (0 and 1). These ports are intended for use with SFP/SFP+. SFP/SFP+ modules are 10Gb hot-swappable, optical transceivers, which convert serial electrical signals to external ...

Aruba Mobility Master Hardware Appliance | Installation Guide Console Port Use the serial CONSOLE port to allow direct local management. This port is a RJ-45 female connector that accepts an RS-232 serial cable with a male connector. See Figure 3. Figure 3 Serial Console Port Pin-Out The communication settings for the Console port is shown in the following table: USB to Serial Interface Cable A USB to serial interfa ...

Mobility Master Hardware Appliance | 11 The management port has an LINK LED on its left side and SPEED LED on its right side. During operation, these LEDs provide status information as shown in the following table: Fan Module The Mobility Master hardware appliance is equipped with three field-replaceable, hot-swappable fan modules. Each fan module features a fan that pull air through the chassis ...

Aruba Mobility Master Hardware Appliance | Installation Guide Hot Swapping Hot swapping allows you to replace one failed power supply while the other provides full power. This makes it unnecessary to shut down the Mobility Master hardware appliance during the replacement procedure. Hot swapping is supported only when power redundancy is in effect. This requires that after the target power supply is removed, the devic ...

Installation | 13 Chapter 2 Installation This chapter describes how to install an Aruba Mobility Master hardware appliance using the many mounting options available. The Mobility Master hardware appliance ships with an accessory kit that includes the equipment needed to install the appliance in standard, 19-inch telco rack.  “Precautions” on page 13  “Selecting a Location” on page ...

Aruba Mobility Master Hardware Appliance | Installation Guide to contact any device, cable, object, or person attached to a different electrical ground. Also, never connect the device to external storm grounding sources.  Perform installation or removal of the chassis or any module in a static-free environment. Proper use of anti-static body straps and mats is strongly recommended.  Modules must be kept in anti-static packaging when ...

Installation | 15  Suitable Screwdrivers for all screw types provided in the box (not included in the kit) Installation Steps To install a Mobility Master hardware appliance into a two-post 19-inch Telco rack: 1. Place the mounting bracket over the mounting holes on the appliance (see Figure 5). Figure 5 Rack Mount Brackets- Standard 2. Secure the bracket to the appliance using the eight scr ...

Aruba Mobility Master Hardware Appliance | Installation Guide Rack Mount Installation- Mid This mounting option allows mounting the Mobility Master hardware appliance from the middle in standard two-post 19-inch Telco rack. The mounting brackets can be used for this installation as well. Required Tools and Equipment The following tools and equipment are required for installing a Mobility Master hardware appliance:  Mounting Bracket (x2 ...

Installation | 17 Figure 8 Rack Mount Installation- Mid Table or Shelf Installation Required Tools and Equipment  Rubber Feet (included in the kit) Installation Steps 1. Attach the rubber feet to the bottom of the appliance(see Figure 9). Figure 9 Attaching Rubber Feet 2. Place the appliance in the location you have chosen. Leave a minimum of 10 cm (4 inches) of space on the left and right ...

Aruba Mobility Master Hardware Appliance | Installation Guide Connecting and Disconnecting the AC Power Cord Once you have installed the Mobility Master hardware appliance, you are ready to power On the device. The Mobility Master hardware appliance is not equipped with an On/Off switch. The device will power On when the AC power cord is connected to the power supply and an AC power outlet. To connect the AC power cord to the Mobility Mas ...

Installation | 19 2. Align the new fan module with opening in the appliance. 3. Insert the fan module into the appliance. 4. Turn the screws on the fan module clockwise until tight to secure the fan module into the appliance. Installing and Removing a Power Supply The power supply modules are hot-swappable. Hot swapping allows you to replace a failed power supply without powering down the Mobili ...

Aruba Mobility Master Hardware Appliance | Installation Guide 2. Pull the tab on the power supply module towards the left and slide it out using the handle (see Figure 11). 3. If you are not replacing the power supply module immediately, ensure to install a filler panel that was included with your Mobility Master hardware appliance. To install the filler panel: a. Align the filler panel with the opening in the appliance. b. Slide the fill ...