Prisma H701 Operation & User’s Manual

Caution ! Make sure to leave the door open when registering password Open the battery cover of indoor body and press [Registration] button Please check outdoor body from here Enter password (4 to 12 digits) Press [*] button to complete and confirmation sound will be followed Note: To add more password (up to 4), repeat steps ③ and ④ before keypad light turns off Caution ! - If do not enter password for 10 seconds after press [Registration] button, the process will be canceled. - When new password is registered, previously registered-password will be automatically deleted. Check if the keypad’s light is on 1. Register and Change Passwor ...

3. Erase All Registered Fingerprints 4. To Open Door from Outside (Continued) 4. Open Door from Outside By Fingerprint Touch [Activation Sensor], [Auto Cover] will be open and green light on the sensor will be on Sweep registered fingerprint through the fingerprint sensor With a confirmation sound, the door will be opened Open the battery cover of indoor body and press [Registration] button Please check outdoor body from here Check if the keypad’s light is on Press [#] button for 5 seconds to delete and confirmation sound will be followed 5 Seconds Note: - If you sweep unregistered fingerprint more then 5 times, the lock will activate 1-Mi ...

6. Open Door from Inside Caution ! If you close a door in Auto Lock status, it will be closed within 7 seconds by the automatic lock sensor. 7. Close Door from Inside By [Open/Close] button Press [Open/Close] button When a door is closed By Manual Knob Turn the [Manual Open/Close Knob] to OPEN side When a door is closed If Auto Lock is set A door will automatically be closed once closed within 2 second. By [Open/Close] button Press [Open/Close] button By Manual Knob Turn the manual open/close knob to CLOSE side □ Outside Forced Lock : To stop the function of [Open/Close] button Setting Unsetting Touch the keypad when a door is locked Enter ...

□ To stop the volume when you want to use without sound (For one time) Touch the keypad and press the [#] button 2. Volume Control Note: This is just for one time, sound will be activated from very next time. With Password Enter password, press [#] button, and a door will be unlocked (No sound, and only keypad light blinking) With RFID Card Touch RFID card on reader and a door will be unlocked. Volume can be adjusted in 7 levels. Make the deadbolt is out Touch the keypad Enter your password And press [#] button twice Press [4] : Auto Lock set Press [7]: Manual Lock set Touch the keypad Enter your password ...

Enter password Press [#] button Press [5] button and Multi-Touch Security function will be set with confirmation sound Note: If you unset Multi-Touch Security, repeat step ①, ②, ③ and ④ when the function is set. Caution ! When ‘Multi-Touch Security’ is ON, first press password and automatically chosen 3 random number will show. Press the numbers and [*] button This will automatically be off when Random Number is on and vice versa. 2. Break-in Alarm Caution ! If the indoor body is exposed by direct sunlight for long time, the temperature sensor will work and will go off the alarm. The lock will be unlocked aut ...

5. Low Battery Alarm If a password or a RFID card is yet to be registered is entered for 5 consecutive times, the alarm will go off and nothing will work for 1 minute. 5 consecutive times?? 4. Deadbolt Alarm When a door is opened or closed, if a deadbolt work abnormally, the alarm will go off with ‘Beep’ sound for 3 times. Beep, Beep, Beep Caution ! If Deadbolt Alarm keeps going off and the lock is not working normally, the lock may need be to re-installed. Please contact to experts. Beep, Beep, Beep When Low Battery Lamp is on and battery alarm goes off, please change batteries. Make sure change the all used batteries and put all ne ...