BenQ SH910 Operation & User’s Manual

2 Table of contents Important safety instructions .........................3 Introduction........................7 Projector features .................................. 7 Shipping contents.................................. 8 Projector exterior view.......................... 9 Controls and functions ....................... 10 Positioning you ...

3 Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read th ...

4 Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to break on ra ...

5 Safety Instructions (Continued) 13. Do not place this projector in any of the following environments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector. - Locations where temperatures may become excessively high, such as the inside of a car with a ...

6 Safety Instructions (Continued) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to the projector, doing so may result in accide ...

design to deliver high reliability and ease of use. The projector offers the following features. • LAN display for network control and web server • LAN display 4-1 (maximum 4PC/ NB display to 1 projector) • Remote deskt ...

are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card is only supplied in some specific regions. ...

1. External control panel (See "Projector" on page 10 for details.) 2. Lamp cover 3. Zoom ring 4. Focus ring 5. Lens cover 6. Vent 7. Speaker 8. Front IR remote sensor 9. Projection lens 10. Quick-release button 11. Kensington anti-theft lock slot 12. RGB (PC)/Component video (YPbPr/ YCbCr) signal input jack 13. RS-232 ...

Projector 6. BLANK Used to hide the screen picture. See "Hiding the image" on page 34 for details. 7. TEMPerature indicator light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 79 for details. 8. Power/POWER indicator light Toggles the projector between standby mode and on.See "S ...