TBS CROSSFIRE Micro TX Manual 

Revision 2019-03-24 Adaptive Long Range Remote Control System The TBS CROSSFIRE (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of range without sacrificing basic functionality such as being immune to interference from onboard equipment, low latency control or two-way communications including telemetry ...

Attention Drone Racing Environment Crossfire LED Color Coding Overview Setup Connecting CROSSFIRE Standard Transmitter to radio Using JR-adapter Using Hitec/Graupner/JR-cable Using Futaba-cable Using custom PPM cable CRSF with other radios Connecting CROSSFIRE Micro transmitter to radio Push button functionality Connecting CROSSFIRE Diversit ...

Preparations Simulating flight Simulating a Crash Search and rescue Link regained Transmitter LED status indicator Receiver LED status indicator Real-time telemetry using app link Configuration Standard transmitter configuration Micro transmitter configuration Receiver PWM or PPM servo output Receiver SBUS output Receiver RSSI or/and LQ out ...

Setting up receiver for CRSF Configuring BetaFlight for CRSF protocol Discovering telemetry data sensors Configuration of CORE PRO / CROSSFIRE RX with LUA Scripts or the TBS TANGO Requirements Setup Telemetry TBS Tango Firmware upgrade Installing TBS Agent Emergency update FAQ Good practices 4 ...

Band: Europe: 868 MHz SRD Band America: 915 MHz ISM Band RF power Radio Signal & Telemetry downlink: Micro TX: Selectable 25mW and 100mW (250mW with FW 2.40 or later) Standard TX: Selectable 10mW to 500mW, additional 1W and 2W available with external power connected via XT30 socket Diversity, Micr ...

be not allowed in your country. Please always check your local RF legislation to set the frequency and output power according with the regulation. A general rule for RC aircrafts is that they must be controlled always under sight of view, check your ...

Standard transmitter module: Diversity receiver unit: 7 ...

R/C equipment. Connecting CROSSFIRE Standard Transmitter to radio Using JR-adapter The kit comes with a JR-adapter which simply works as a connection bridge between the JR-pins on the radio and the TBS CROSSFIRE transmitter. The adapter simply fits int ...

manufacturers manual for further details on how to complete this step. Using Hitec/Graupner/JR-cable If you own a Hitec, Graupner or JR radio (does not work for Spektrum radios) without a JR-module slot, you can still use the trainer output connector to get th ...