Areca ARC-1883 Series Quick Start Manual

12Gb/s SAS RAID Cards Quick Start Guide Version: 1.4 Issue Date: May, 2016 all-guides com ...

The information regarding products in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. All brands and trademarks are the properties of their respective owners. This manual contains materials protected under International Copyright Conventions. All rights reserved. No part of t ...

1.1 Overview .........................................................................4 1.2 Features ..........................................................................6 2. Hardware Installation ............................................... 10 2.1 Before You First Installing................................................. 10 2.2 Board Layout .............. ...

ler, ARC-1883 series. (PCIe 3.0 to 12Gb/s SAS RAID controllers) 1.1 Overview The 12Gb/s SAS interface supports both 12Gb/s SAS disk drives for data-intensive applications and 6Gb/s SATA drives for low-cost bulk storage of reference data. The ARC-1883 family includes 8 ports low profile as well as 12/16/24 internal ports with additional 4 external ports mod ...

will provide maximum read/write performance improvements for the most performance-hungry database and IT applications. The ARC-1883ix includes one 12Gb/s SAS expander that incorpo- rates the latest enhancements in SAS along with new LSI DataBolt bandwidth optimizer technology. This is designed to help facilitate the industry transition to 12Gb/s SAS-enabled systems by allow- ...

operating systems, motherboards, applications and device drivers. Easy RAID Management The controllers contain an embedded McBIOS RAID manager that can access via hot key at M/B BIOS boot-up screen. This pre-boot McBIOS RAID manager can use to simplify the setup and manage- ment of RAID controller. The controller firmware also contains a browser-based McRAID storage manager whic ...

(optional) • RoHS compliant RAID Features • RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD • Multiple RAID 0 and RAID 10(1E) support (RAID 00 and RAID100) • Multiple RAID selection • Configurable stripe size up to 1024KB • Support HDD firmware update • Online array roaming • Online RAID level/stripe size migration • Online capacity exp ...

• Single Admin Portal (ArcSAP) quick manager utility Out-of-Band Manager • Firmware-embedded web browser-based McRAID storage man- ager, SMTP manager, SNMP agent and Telnet function via Ethernet port • API library for customer to write manager utility • Support push button and LCD display panel (optional) Operating System • Windows 10/8/Server 2012/7/2008/Vista/XP/2003 • ...

Model Name ARC-1883ix-12 ARC-1883ix-16 ARC-1883ix-24 I/O Processor Dual Core RAID-on-Chip 1.2GHz Form Factor (H x L) Full Height: 98.4 x 254 mm Host Bus Type PCIe 3.0 x 8 Lanes Driver Connector 3xSFF-8643 1xSFF-8644 4xSFF-8643 1xSFF-8644 6xSFF-8643 1xSFF-8644 Drive Support Up to 256 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA HDDs FBM/BBM Support ARC-1883-CAP (support cache 2GB)/ ARC-1883-BAT (support cache 2GB, 4GB o ...

This section describes the procedures for installing the 12Gb/s SAS RAID controllers. 2.1 Before You First Installing Thanks for purchasing the 12Gb/s SAS RAID controller as your RAID data storage subsystem. This user manual gives simple step-by-step instructions for installing and configuring the 12Gb/s SAS RAID controller. To ensure personal safety and to protect your equipment and data, reading the follo ...

14-pin box header 2. (J2) I 2C/LCD Connector 7-pin header 3. (J3) Global Fault/Activity LED 4-pin header 4. (J4) PCI-E Power Connector 6-pin header 5. (J5) Manufacture Purpose Port 12-pin header 6. (J6) Ethernet Port RJ45 7. (J7) Individaul Fault LED Header 24-pin header 8. (COM1) RS232 Port for CLI to configure the expander functions on the RAID control ...

12-pin header 2. (J2) Flash-based/Battery Backup Module Connector 14-pin box header 3. (J3) I 2C/LCD Connector 7-pin header 4. (J4) Global Fault/Activity LED 4-pin header 5. (J5) Individual Activity (HDD) LED Header 4-pin header 6. (J6) Individual Fault LED Header 4-pin header 7. (J7) Ethernet Port RJ45 8. (SCN1) Mini SAS HD 1-4 Ports (Internal) SFF-8643 9. (SCN2) Mini SAS ...

Connector Type Description 1. (J1) Manufacture Purpose Port 12-pin box header 2. (J2) Flash-based/Battery Backup Module Connector 14-pin header 3. (J3) Global Fault/Activity LED 4-pin header 4. (J4) Individual Fault/Activity LED Header 8-pin header 5. (J5) I 2C/LCD Connector 7-pin header 6. (SCN1) Mini SAS HD 5-8 Ports (External) SFF-8644 7. (SCN2) Mini SAS HD 1-4 Ports (Internal) SFF-8643 8. (J6) Et ...

Activity LED (Blue light) The activity LED is lit that indicates the adapter is active. The following table describes the ARC-1883ix external port Mini SAS HD SFF-8644 link/activity LED behavior. Figure 2-4, ARC-1883x Top View Connector Type Description 1. (J1) Manufacture Purpose Port 12-pin header 2. (J2) Flash-based/Battery Backu ...

standard hand tools to open your system’s case. System Requirement The 12Gb/s SAS RAID controller can be installed in an universal PCIe slot and requires a motherboard that: ARC-1883 series 12Gb/s SAS RAID controller requires: • Comply with the PCIe 3.0 x8 lanes It can work on the PCIe 3.0 x1, x4, x8, and x16 signal with x8 or x16 mechanical slot M/B. � ...

tions: • Do not remove the 12Gb/s SAS RAID controller from its anti- static packaging until you are ready to install it into a computer case. • Handle the 12Gb/s SAS RAID controller by its edges or by the metal mounting brackets at its each end. • Before you handle the 12Gb/s SAS RAID controller in any way, touch a grounded, anti-static surface, such ...

Step 5. Mount the Drives You can connect the SAS/SATA drives to the controller through direct cable and backplane solutions. In the direct connection, SAS/ SATA drives are directly connected to 12Gb/s SAS RAID controller PHY port with SAS/SATA cables. The 12Gb/s SAS RAID controller can support up to 28 PHY ports. Remove the front bezel from the computer chassis and install the cages or SAS/SATA d ...

backplane or the individual drives. In the backplane solution, SAS/SATA drives are directly connected to 12Gb/s SAS system backplane or through an expander board. The number of SAS/SATA drives is limited to the number of slots available on the backplane. Some backplanes support daisy chain expansion to the next backplanes. The 12Gb/s SAS RAID controller can support d ...

Figure 2-7, Connecting to HDD Step 6. Install SAS Cable This section describes how to cable a controller to the drive or backplane. ...

There is a 6-pin PCI-E connector on the ARC-1883ix labelled J4. You must plug in a PSU’s PCI-E cable at all times to supply enough stable power for the controller. Figure 2-9, Connect Direct from Power Supply If your power supply doesn’t have a 6 pin PCI-E power cable then you can use the adapter to convert two 4 pin peripheral power cables into a PCI-E power cable. If y ...