APURO DM079 Instruction Manual
Text of the manual
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components or service panels on this product
Consult Local and National standards to comply with the following:
o Health and safety at work legislation
o BS EN Codes of practice
o Fire Precautions
o IEE wiring regulations
o
Telephone Helpline: 130 0225960
Installation
Ensure you have adequate support to support the appliance and proceed to drill and install the fixing
screws
Once the screws are installed, locate the appliance on the wall by aligning the locating holes on the
back plate with the screws.
WARNING: Ensure the substrate and fixings used to mount the Knife
Open the door, and put the Knives in the basket (Knifes should be washed and dried before placing
inside the sterliser). Ensure that the knives are held in the rack with the blade facing upwards and
angled towards the back of the unit. The handle of the knife should be resting on the floor of the unit
behind the front lip. Please see image b
Telephone Helpline: 130 0225960
Trouble Shooting
Fault
Probable Cause
Action
The unit is not working
The Unit is not switched on
Check the unit is plugged in correctly and
switched on
Bulb has blown
Replace bulb (Bulb must have a light wave
length of 253.7nm – please contact your
retailer)
Plug and lead are damaged
Call APURO agent or qualified technicia
The WEEE logo on this product or its documentation indicates that the product must not
be disposed of as household waste. To help prevent possible harm to human health
and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of this
product correc
DECLARATION OF CONFORMITY
Equipment Type
Knife Steriliser
Model
DM079-A
Legislation
C-Tick
AS/NZ 3820 Essential Safety Requirements for Low Voltage
Electrical Equipment
Standards
EN 55014-1:2006+A1: 2009+A2: 2011
EN 61000-3-2: 2006+A1:2009+A2:2009
EN 61000-3-3:2008
EN 55014-2: 1997+A1: 2001+A2: 2008
IEC 60335-1:2012
EN62233:2008
Producer Name
Apuro
Produce