Danfoss VLT HVAC Programming Manual

Text of the manual

1.1.1 Copyright, Limitation of Liability and Revision Rights

5 1.1.2 Symbols 6 1.1.3 Abbreviations 6 1.1.5 Definitions 7 1.1.6 Electrical Overview 11 2 How to Programme 12 2.1 Programming with MCT-10 Setup software 12 2.2 Local Control Panel (LCP) 12 2.3 Menus 13 2.3.1 Status 13 2.3.2 Quick Menu 13 2.3.3 The FC101 Start-up Wizard

3.4.1 3-0* Reference Limits

30 3.4.2 3-1* References 30 3.4.3 3-4* Ramp 1 31 3.4.4 3-5* Ramp 2 31 3.4.5 3-8* Other Ramps 32 3.5 Main Menu - Limits/Warnings - Group 4 33 3.5.1 4-1* Motor Limits 33 3.5.2 4-5* Adj. Warnings 33 3.5.3 4-6* Speed Bypass 34 3.6 Main Menu - Digital In/Out - Group 5 35 3.6.1 5-0* Digital I/O Mode 35 3.6.2 5-1* Digital Inputs 35 3.6.3

3.11 Main Menu - Drive Information - Group 15

61 3.11.1 15-0* Operating Data 61 3.11.2 15-3* Alarm Log 61 3.11.3 15-4* Drive Identification 61 3.12 Main Menu - Data Readouts - Group 16 63 3.12.1 16-0* General Status 63 3.12.2 16-1* Motor Status 63 3.12.3 16-3* Drive Status 64 3.12.4 16-5* Ref. & Feedb. 64 3.12.5 16-6* Inputs and Outputs 65 3.12.6 16-8* Fiel

5.1.9 8-** Comm. and Options

86 5.1.10 13-** Smart Logic 87 5.1.11 14-** Special Functions 87 5.1.12 15-** Drive Information 88 5.1.13 16-** Data Readouts 89 5.1.14 18-** Info & Readouts 90 5.1.15 20-** Drive Closed Loop 90 5.1.16 22-** Appl. Functions 90 5.1.17 24-** Appl. Functions 2 91 Index 92 Contents VLT HVAC Basic Drive Programming Guide 4 MG.18.B1.02

VLT HVAC Basic Drive

Software version: 1.2X This guide can be used with all VLT HVAC Basic Drive frequency converters with software version 1.2X. The actual software version number can be read from 15-43 Software Version. 1.1.1 Copyright, Limitation of Liability and Revision Rights This publication contains information proprietary to Danfoss.

Symbols used in this guide.

NOTE Indicates something to be noted by the reader. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or equipment damage. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. * Indicates def

1.1.4 Available Literature for VLT HVAC Basic

Drive - Quick Guide MG.18.Ax.yy - Programming Guide MG.18.Bx.yy provides information on how to programme and includes complete parameter descriptions. - Design Guide MG.18.Cx.yy entails all technical information about the frequency converter and customer design and applications. - PC-based Configuration Tool MCT-

Other DC Drives Manuals