ClearOne COLLABORATE Live 900 Quick Start Manual

2 COMPONENTS INCLUDED COLLABORATE Live 900 COLLABORATE Live codec with power supply, COLLABORATE Remote control with dongle, and HDMI cable. 910-2100-003 UNITE 200 PTZ camera, power supply, HDMI cable and RS232 Serial Control cable. Note: The remote control inside the camera box is only for any advanced configuration in the camera, if required. For the camera’s control, use the COLLABORATE Codec Appliance’s remote control. CONVE ...

Connect the Beamforming Microphone Array 2 to the CONVERGE Pro 2 48V. Then, connect the CONVERGE Pro 2 48V, UNITE 200 camera, Ethernet, and monitor(s) to the COLLABORATE Live codec as shown. NOTE: Audio output and power connections not shown. Ethernet Connection CONVERGE Pro 2 48V 1080p HDMI Camera Video USB Audio Transmit and Receive HDMI Output Display Port Output UNITE Camera Camera Serial Control E-bus From ...

4 CONNECTING THE REMOTE CONTROL DONGLE The Remote Control includes a dongle that plugs into the FRONT USB port on the codec. ...

After all peripherals are connected to the unit, turn the unit on. Once COLLABORATE Live is loaded – you will see your local camera video on your screen. Using the remote control, navigate to the display settings: Settings > Advanced > Display According to your monitor capabilities, set to the maximum supported resolution. If 2 monitors are connected to the unit, the display mode is automatically changed t ...

6 CONFIGURING AUDIO SETTINGS The COLLABORATE Live audio input and output is Converge Pro. Verify this in COLLABORATE Settings > Audio & Video ...