BLACKHAWK! USB560bp Quick Start Manual
Text of the manual
PC or Notebook computer with at least one free USB v1.1 or v2.0 port.
•
Windows® 2000/XP/Vista Operating Systems (32 or 64-bit versions).
•
Texas Instruments Code Composer Studio version 2.2† or later.
•
CD ROM Drive.
† For CCStudio v2.0 and v2.1
FIGURE 2 - USB560bp USB End Plate
1. Place the USB560bp JTAG Emulator module in desired location
(most likely near the target hardware).
2. Attach the supplied USB cable to an available USB port on the PC
and to the USB connector on the USB560bp JTAG Emulator (see
Figure 2).
3. Follow the Plug and Play installation for the Windows device driver
(see sec
