Huawei FT2260 Specification
Text of the manual
Wireless Home Phone Connect
DEVICE SPECIFICATIONS
Dual Band CDMA 800/1900 MHz
Transmit Ranges - 200 mW (23dBm)
Chipset: QSC6055
Memory: 16 MB RAM/64MB Flash
Environment
- Operating temperature range: -10°C to + 50°C
- Storage temperature range: -40°C to +50°C
- Humidity: 5% to 95% (non-condensing)
RJ-11 Interface
-Ringer equivalence number (REN) 5.0
-Dyn
Home Phone Connect Accessories
In Box - AC Adapter
In Box - Battery Pack NiMH
1500 mAh
In Box - Battery Cover
In Box - Antenna
Confidential and proprietary material for authorized HUAWEI personnel only. Use, disclosure or distribution of this material is not permitted to any unauthorized persons or third parties except b
written agreement.
Signal Strength Indicators
Icon
Indicator
Status
Voice mail
Blinking Blue
New Message
Battery
Blue
Full Charge
Blinking Blue
Partial Charge
Blinking Red
Low Charge
Signal Strength
Both Blue
Strong
One Blue
Moderate
One Blinking Blue Weak
Power
Blue
The device is on
* Note: Never place a USB-based device into the
USB port of the Home Phone Con
Set up of the Home Phone Connect
NOTE: The battery is intended for backup purposes only (in the event of a
power failure). The device takes 3.5 hours to charge fully. The charge time
may be impacted by environmental factors. Talk time is about 2 hours and
standby time is about 36 hours, but the actual values vary with network
environment.
Remove the battery
Powering On and activating your Home Phone
Connect
1. Press the button to power on the device. When the device
is on, the power indicator will be blue.
2. Make sure you follow the instructions provided in the User
Manual or Quick Start Guide to set up your device.
3. Dial *228 from your home telephone. (The phone must be
connected to the Home Phone Con
