Channel Vision A0360 Instructions Manual

www.channelvision.com This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfu ...

DO NOT OPEN ! IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions for future reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this device near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with these instructions ...

Red indicates no audio input - Amplifier is in standby. Green indicates audio input is present. Volume Control works only when this LED is green. Specifications: Power input: Audio Output: OHMS Frequency Response: Signal to Noise Ratio: Subwoofer output frequency Input Sensit ...

codes for controlling the Amplified Wireless Audio Receiver as well as many other Channel Vision audio products. A0127/A0129 ... IR repeating keypad. The A0127 contains the IR codes to operate the volume controls in the Amplifier Audio Receiver. You may also use a standard IR receiver or a 3rd party keyp ...

The A0360 can accept the signal from one Channel Vision’s CAT5 Audio Hubs, such as the P-2044. Audio and IR signals are transmitted through the CAT5 cable, while power is connected directly to the back of the A0360. Power supply Left Right PRO C V HANNEL ISION TM Active Active Active Active Link In Link Out Zone ...

CAT5 audio hub here Cat5 Output Can also be used as keypad input Rear Power Access Green connector located under top circuit board. 16AWG recommended. 24VDC 2.5Amp IR Sensor Remote IR-receiver Bluetooth Link Button Optical Input The is an in-wall 100W amplifier with 3 inputs: Bluetooth 4.2, Optical A ...