aFe Power Scorcher Getting Started
Text of aFe Power Scorcher Getting Started
Before You Begin
What’s in the box:
USB cable
for easy internet updates
USB cable
for easy internet updates
Button Functions
OK
Up, Increase
Right
Next
Forward
Left
Back
Exit
Down, Decrease
Contents
Before You Begin .........................2
Dear Auto Enthusiast ..................3
Getting Started - Step 1 ..............4
Getting Started - Step 2 ..............5
Getting Started - Step 3 ..............6
Tunes ......................................
Dear Auto Enthusiast
Thank you for purchasing one of our Scorcher programmers Powered by Superchips.
We specialize in delivering real world performance to your ride. The Scorcher
programmer is easy to use, fl exible and easy to update when you want to. This “Getting
Started Guide” will walk you through programming your vehicle and using the many
exciting features a Scorcher programmer offers. Better yet, personalize your aFe Power
experi
Getting Started - Step 1
Update Your Programmer
Regularly use the aFe internet update software to check
for updates. The software can be downloaded at
www.afepower.com. With the click of a mouse, your program-
mer is up-to-date with the latest software and calibrations.
Included in the update are the vehicle manufacturer’s most
recent calibration as well as feature and safety updates.
Follow these steps:
You will need to be connected to the inter
aFe Power Scorcher Getting Started - Step 2
Plug Your Programmer into the Vehicle’s OBD-II Port
Locate your vehicle’s OBD-II port, then insert the Programmer’s OBD-II cable.
Your OBD-II Vehicle Port is usually located under the drivers side dash as shown here.
Do not remove the programming
cable during any programming sequence.
If you do, the vehicle may not start. A
Scorcher programmer is designed to
automatically go into Vehicle Recovery
Mode and if this occur
Getting Started - Step 3
Select Tune Vehicle
Press OK
Select Quick Tune or Advanced Tune
Press OK
“Quick Tune” changes the power level of your
vehicle and uses the most popular features
and settings.
“Advanced Tune” changes the power level of your
vehicle and allows you to select settings for advanced
features and settings.
Helpful Hint
Switch ignition between OFF and RUN
(ON) as requested – Do not start engine
Note: Not all features are
a
Select Tune Level - Follow on screen prompts for power level requirements.
These may vary by product and could include all or some of the following:
aFe Performance
aFe Heavy Load Tow
aFe Light load Tow
aFe Transmission Only
aFe 87 Octane
aFe Stock w/Options
aFe Factory Stock
Switch ignition between OFF and RUN (ON) as requested - Do not start engine
Once you have completed all the on-screen prompts and made your selections,
the programmer will upda
Maximum engine and transmission performance gains.
i Towing not recommended.
i Octane requirements vary for gas vehicles.
Follow recommended guidelines.
Tow Power
aFe Heavy Load Tow
Optimizes engine and transmission performance for heavy towing applications.
i Tow rated up to OEM max towing recommendation.
i Octane requirements vary for gas vehicles. Follow recommended guidelines.
aFe Light Load Tow
Optimizes
aFe Power Scorcher aFe Mileage SAVE Feature
Optimizes engine and transmission performance for fuel economy.
i Towing not recommended.
i Uses 87 Octane calibrations for gas vehicles where applicable.
aFe 87 Octane
Optimizes settings allowing 91 Octane required or recommended vehicles to safely
use 87 Octane gasoline.
i Towing not recommended.
Other Calibration Options:
aFe Stock w/Options
Uses factory stock calibration plus user chosen options and settings.
i E
aFe Power Scorcher Most options are optimized using the Quick Tune tuning option. Use Advanced
Tune to independently set options. Options vary by vehicle.
aFe Speed Limiter
Adjusts top speed limiter by increments or fi xed values.
i• Vehicle must have appropriate speed rated tires.
i Do not exceed proper operating conditions.
i Obey all traffi c laws.
i For use only on a controlled track. Never exceed
legal limits on public roadways.
aFe Rev Lim
Axle (Gear) Ratio
Corrects the speedometer, odometer and automatic transmission shift points
(where supported) for rear end gear changes.
i Confi rm aftermarket parts are installed before adjusting this option.
i 2007 – 2010 Wrangler JK gear ranges are 2.00 – 10.00 in 0.01 increments.
Automatic Transmission Shift Points
Adjust transmission points for optimized drivability and operation. Varies by vehicle.
Automatic Transmission Shift Pressure
Most Jeep options are optimized using the quick tuning option. Use Advanced Features to
independently set options. Scorcher will automatically show you the advanced features
available for your Jeep.
Transfer Case (gear)
Corrects speedometer, odometer and automatic shift points (where supported) for transfer
case gear changes.
i Confi rm aftermarket parts are installed before adjusting this option.
i 2007 – 2010 Wrangler JK Tran
Real Time Idle Up
Allows you to raise the idle of your Jeep for ‘powered take offs’ or running accessories such
as air compressors or welders. The idle up is a real-time feature meaning no programming
required. Just plug Scorcher into the OBD-II port and control the idle in real-time. The range
you may increase the idle is 800 – 1600 RPMs.
i Real Time Idle Up is a real-time feature meaning no programming is required.
When you restart the engi
Jeep Power Levels
There are several available tunes in the Scorcher for Jeep vehicles. Scorcher automatically
shows you the tunes available for your Jeep.
93 Performance
Requires the use of 93 Octane gas and is used for maximum horsepower, torque and drivability
for on-road and off-road uses. The tune is calibrated for 2WD, 4WD-HI and 4WD-LO uses.
i This tune is currently only available for JK models.
91 Performance
Requires the use of 91 Octane g
Requires the use of 91 Octane gas or better and is used for an optimized towing experience
for up to the OEM recommended towing limits.
i This tune is safe to use in 4WD-HI or 4WD-LO and is available for all Jeeps covered
by aFe Power.
Crawling Tune
Is an aFe Power exclusive tune offering low throttle response and high low-end torque
tune designed for precision low-speed maneuvers.
i This tune is currently only available for JK models.
Returning to Stock
The service center might reprogram your vehicle with an updated program without your knowledge. If
you did not use an aFe Power programmer to return your vehicle to factory stock and your vehicle is
reprogrammed by the service center, the programmer will no longer be able to program your vehicle.
Before taking your vehicle to a service center, return the vehicle to factory stock.
The fi rst time you program your vehicle, your fa
Engine Diagnostic Tool
If a DTC persists, this could indicate a vehicle
malfunction or problem condition. Be sure to return
the vehicle to stock prior to taking it in for service
to address the issue.
Helpful Hint
Use the Engine Diagnostic Tool to check trouble codes. A Diagnostic Trouble Code (DTC)
arises when a vehicle’s computer detects a sensor failure or a parameter outside a
specifi c range. Most vehicles will illuminate the check engine l
aFe Power Scorcher Information and Settings
You can change the display setting by simply connecting the programmer to your
computer. For Programmer and/or Vehicle information, the Scorcher software needs
to be installed.
Programmer Information
Displays serial number of the programmer, fi rmware version and vehicle database
versions (car database, gas truck database, diesel database, etc.) Firmware and
databases are updated through the Scorcher Internet Easy Update