Accumet AP85 Instruction Sheet
Text of the manual
v e n d o r
C E R T I F I E D
Table of Contents
1. Introduction..............................................................................................4
2. Display and keypad functions...............................................................5-6
2.1 Display......................................................................................................................
Thank you for selecting an accumet® AP85 meter. This portable meter is a
microprocessor-based instrument that measures pH, conductivity, Total Dissolved
Solids (TDS) and temperature. Your meter has many user-friendly features, all of
which are accessible through the membrane keypad.
Your meter includes a single-junction pH electrode, a c
The large membrane keypad makes the instrument easy to use. Each button,
when pressed, has a corresponding graphic indicator on the LCD.
ON/OFF............Powers and shuts off the meter.
HOLD ..............Freezes the measured reading. To activate, press HOLD while in
measurement mode. To release, press HOLD again.
NOTE: When auto endpoint feature
Your AP85 meter includes two probes:
• single junction, epoxy body combination pH electrode with BNC connector
• conductivity/TDS/temperature probe with a notched 6-pin connector
The temperature sensing element built into the conductivity probe will also
compensate for pH readings as long as both probes are in your solution at the
s
