Control 4 C4-KPS48-BL Installation Manual

Text of the manual

48V Wireless Keypad

Power Supply Installation Guide Introduction The 48V Wireless Keypad Power Supply enables Control4 wireless keypads—typically used with standard 110V or 240VAC power—to be powered using Class 2 low-voltage power. Multiple keypads can be powered over common low-voltage wiring, such as 16/2 or CAT5e Ethernet cable. Box contents •

4 Connect the black 48VDC (ground) lead/terminal from the

power supply output to the Neutral (white or blue) and Earth Ground (green/yellow) lead/terminal of the keypad. Tip: Wiring connections should be secured using conventional wire nuts or terminal blocks. Keypad connection Power supply output wire leads Line In (black or brown) Red (48V+ positive) Ne

Other Power Supply Manuals