Axis Q19 Series Installation Manual

AXIS Q1910 Thermal Network Camera AXIS Q1910-E Thermal Network Camera AXIS Q1921 Thermal Network Camera AXIS Q1921-E Thermal Network Camera AXIS Q1922 Thermal Network Camera AXIS Q1922-E Thermal Network Camera ...

vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license. To purchase further licenses, contact your reseller. Trademark Acknowledgments Apple, Boa, Bonjour, Etherne ...

for further reference. CAUTION! • When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product. • Store the Axis product in a dry and ventilated environment. Keep the storage ...

Page 5 ENGLISH AXIS Q19 Thermal Camera Series Installation Guide This installation guide provides instructions for installing an AXIS Q1910/-E/Q1921/-E/Q1922/-E Thermal Network Camera on your network. For all other aspects of using the product, please see the User Manual, available on the CD included in this package, or fro ...

Hardware overview Part number (P/N) & Serial number (S/N). The serial number may be required during the installation. Connector (not used) Button (not used) 1/4” screw mount for wall/ceiling stand Window heater connector LED (not used) Status indicator LED Network connector Audio in Audio out SD card slot Power con ...

Page 7 ENGLISH AXIS Q1910-E/Q1921-E/Q1922-E Sunshield adjustment Sunshield Top cover Thermal network camera Bottom cover Cable cover Bottom cover screws (4x) Cable cover screws (4x) Cable holes with Safety wire tab Protective window with Network cable (route Wall bracket Bracket adjustment screw through wall bracket) Bracke ...

Unit connectors Network - RJ-45 Ethernet connector. Supports PoE (Power over Ethernet, class 3). Note: Due to local regulations or the environmental and electrical conditions in which the prod- uct is to be used, a shielded network cable (STP) may be appropriate or required. Any net- work cables that are routed in ou ...

Page 9 ENGLISH Power - 3-pin terminal block used for power input. Use a limited power source, such as a mains adaptor, which rated power output does not exceed either 100 W or 5 A. If the Axis product's input voltage is less than 20 V, the current from the mains adaptor shall still be limited to  5 A. If the mains adapto ...

Connection diagram LED indicators LED Color Indication Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity. Amber Steady for connection to 10 Mbit/s network. Flashes for network activity. Unlit No network connection. Status Green Steady green for normal operation. Note: The Stat ...