AvidHiFi REFERENCE TWO Operation & User’s Manual

Text of AvidHiFi REFERENCE TWO Operation & User’s Manual

Key Reference Two features

4 Placement 5 Unpacking 5 Fixing Spikes 6 Connections 8 Cable Choice 8 Specifications 9 Warranty 10 Table of Contents

AVID Reference Two

Congratulations on purchasing your AVID Reference Two. Using the highest quality materials during assembly and built to the highest industry standards, your Reference Two loudspeaker should provide you with many years of trouble-free enjoyment. Please read this manual carefully to ensure you understand all the features and operating functions available. Caution • These units are extremely heavy, and unless great care is taken when mo

KEY REFERENCE TWO FEATURES

• AVID Tuned Mass Damping System. • Highly stable, ultra-rigid Aluminium cabinet construction throughout. • 2 x 9” High Power L.F. drivers with 5” voice coils. • 2 x 6” M.F. drivers with 3” voice coils. • 1 x 28mm HF soft-dome driver. • Precision Drive units utilising: • Uniflow™ Aluminium diecast chassis. •Hexatech™ Aluminium voice coil. •Neodymium flat pancake magnet (H.F.) • Hybrid™ Neodymiu

The Reference Two is a large design,

intended to be used in medium to large rooms. Sitting too close will not give optimum listening results. • Experimentation with both the location of the loudspeakers and your seating position is recommended. • Ideal positioning is room dependent, but typically they will perform best when placed symmetrically in a near-rectangular room playing across the shorter distance. • Aim both loudspeakers sli

GREAT CARE MUST BE TAKEN WHEN CARRYING OUT THIS OPERATION!

For safety reasons, it is best to fit spikes two at a time—for example, fit the two front spikes, and then fit the two rear spikes. Preparation of spikes The spikes are supplied in two parts—the spike and its shroud. These two parts should be assembled before going any further. The spike screws onto a bolt which is captive in the shroud. Simply push the foot into the shroud as f

EXTREME CAUTION MUST BE TAKEN WHILST ATTEMPTING THIS PROCEDURE

This process requires at least 3 people. Before proceeding, ensure that the brakes are applied on all 4 wheels. If you are unsure how to proceed, please seek advice from your dealer. 1: Undo and remove the two large locking bolts above each of the casters, at the front of the plinth. 2: With one person standing behind and one standing in front of the loudspeaker, carefully tip the speaker sli

The Reference Two allows for either bi-wiring or bi-amping. This means that you will need a connection

from you amplifier to each of the terminals on the back of the loudspeaker. We recommend using a bi-wired configuration whenever possible • Either Banana/4mm or Spade connectors may be used. • If would require to use a conventional, single wired connection, you will need to create a short set of ‘jumper’ connections that join the L.

1 x 28mm (Titanium voice coil former)

MF: 2 x 160mm (75mm Titanium voice coil former) LF: 2 x 228mm (130mm Titanium voice coil former) Frequency Response: 24Hz - 22kHz +/-3dB Sensitivity: 90dB 1W@1m Recommended Power: 80 - 1200W Impedance: 4 Ohm Crossover Topology: 3-way, 2nd Order Cabinet Construction: Aluminium Plate. All internal volumes sealed with O-Ring gaskets Dimensions (HxWxD) cabinet: 1250 x 346 x 522 (mm) 49.2 x 13.6 x 20.6 i

Warranty Statement UK Residents

AVID HIFI Limited products are warranted against defects in materials and workmanship for a period of two years from the original date of purchase, or no later than three years from the date of shipment to an authorized AVID agent, which ever comes first, extending to five years subject to the product owner having submitted the Registration form (www.avidhifi.com/register.htm). Also the following conditions being observe

AvidHiFi Speaker System Owners Instructions: