Da-Lite 23 Mounting Instructions
Text of the manual
MOUNTING INSTRUCTIONS FOR
No. 11 and No. 23
Wall Brackets
79163
A Milestone AV Technologies Brand
3100 North Detroit Street
Warsaw, Indiana 46582
P: 574.267.8101 or 800.622.3737
F: 574.267.7804 or 877.325.4832
E: [email protected]
www.da-lite.com
DL–0339 (Rev. 1) 12.15
© 2015 Milestone AV Technologies LLC. Printed in U.S.A.
Extension Wall Mounting Brackets
No. 23 Adjustable Extension Bracket - Showing 2 Positions
.320 DIA. (3) MTG. Holes
Washer
21⁄2"
53⁄4"
1"
Max. Load 75 LBS.
24"
181⁄4"
3⁄4"
13⁄4"
107⁄16"
Washer
No. 23 Adjustable Extension Bracket - Showing 1 Position
.320 DIA. (3) MTG. Holes
21⁄2"
20"
53⁄4"
147⁄16"
53⁄4"
3⁄4"
No. 11 Extension Bracket
Max. Load 75 LBS.
.320 DIA. (3) MTG. Holes
21⁄2"
7⁄16
1"
53⁄4"
14"
107⁄16"
13⁄4"
No. 11 Extension Bracket
A
A
.320 DIA. (3) MTG. Holes
21⁄2"
10"
147⁄16"
53⁄4"
53⁄4"
7⁄16"
Section A-A
Same For All
Plastic Brackets
1"
1"
Wall fasteners not included
•
Install eye bolts in wall brackets. Determine the height and location of the
screen to be mounted and mark. Measure the distance between the centers
of the 2 mounting rings on the screen. Transfer the measurement to the wall
and attach the wall brackets securely to the wall at those points.
•
Maximum recommended fastener size is 5 ⁄ 16" diameter.
•
Do not overtighten fasteners.
•
Extension wall brackets are only to be used with screens weighing 75 pounds
or less.
•
Hang screen from the eye bolts with S-hooks.
Crimp both loops of S-hooks closed.
•
To provide proper tilt and eliminate keystoning pull the screen down, then
hook it back to the wall by attaching the bail handle to an accessory Tilt Lock,
Da-Lite part No. 40965. Tilt Lock is sold separately.
No. 11 Extension Wall Brackets
•
Screen can be extended 10" or 14" from wall by selecting one of the two
mounting positions shown above.
No. 23 Extension Wall Brackets
•
Screen can be extended
181⁄4", 20" or 24" from wall by
selecting one of the two
mounting positions shown
above and wing nut and
bolt adjustment.
•
Extension arm holes should
be lined up with desired
holes in plastic bracket.
Attach extension arms to
wall brackets.
181⁄4" AND 24"
POSITIONS
20"
POSITION
Hex Nut (4)
Eye Bolt (2)
S-Hook (2)
10" Position
Hex Nut (4)
Eye Bolt (2)
S-Hook (2)
14" Position
