DAVIS 7614 Installation Manual
Text of the manual
Product # 7614 & 7615
Wireless Repeater
Installation Manual
The Wireless Repeater receives data from a Wireless Weather Station sensor
array and re-transmits it to the console. The repeater serves to extend the
transmission range and improve reception between the sensor array’s trans-
mitter and the console’s receiver.
One repeater can send data to any
Choosing a Location
! AC-Powered Repeaters
Install in a sheltered location, with access to an AC-power outlet. Posi-
tion between the transmitter and the receiver so as to minimize the num-
ber of walls and other obstacles between both the transmitter and the
repeater or the repeater and the receiver.
! Solar-Powered Repeaters
Find
Multiple Repeaters Installation
Page 3
Both LEDs should flash once when power is applied. If all is well, both LEDs
should flash again, two times quickly, about 12 seconds later. After that second
double-flash, the unit begins looking for a signal. If it finds one, the lower LED
will flash as the data is received and then the upper one will flash as
Product Numbers: 7614 & 7615
Davis Instruments Part Number: 7395-105
Wireless Repeater Installation Manual
Rev. A Manual (4/29/99)
Controlled Online: Weather Manuals:Accessories:Wireless Repeater
This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC. ©
1998 Davis Instruments Corp. All rights reserved.
3465 Diab