ControlByWeb XW-110 Operation & User’s Manual

XW-110/XW-111 User Manual Revisions Revision Description 1.0 Initial release 1.1 Rearranged web page tabs, renamed alert tab, added access point password information 1.2 Added Canadian IC declaration Page 2 Xytronix Research & Design, Inc. ...

Introduction Section 1: Introduction The XW-110 and XW-111 are easy to use wireless Wi-Fi temperature monitoring and status alerting devices. The XW-110 measures and reports temperature using a temperature probe which contains a precision digital sensor. The XW-111 monitors and reports the status of switch closure sensors ...

1.1.1 Features ➢ Wireless Wi-Fi 802.11 b/g/n ➢ Transmission range up to 250ft ➢ Two models available: (1) Temperature, (2) Switch closure input ➢ Built-in web server for configuration and remote monitoring ➢ Temperature sensor is accurate to +/-0.5°C from -10°C to +85°C ➢ Air or submersible tem ...

Installation and Setup Section 2: Installation and Setup 2.1 XW-110 Temperature Sensor Connections The XW-110 works with a “1-wire” digital temperature sensor that is interchangeable and requires no calibration. The sensors accuracy is +/-0.5°C (-10°C to +85°C). The sensor requires three connections for communicat ...

XW-110/XW-111 WiFi™ Users Manual 2.2 XW-111 Switch Closure Connections The XW-111 can sense the state of up to two switch closure sensors. Sensors with switch closure outputs include push buttons, magnetic door alarm switches, micro-switches, or any device which has a relay, switch closure or open collector output. Both sensor inpu ...

Installation and Setup 2.4 Provisioning After making the sensor connections and providing power, you must provision the XW-11x for use on your wireless network. The goal is to configure the XW-11x such that it can recognize and attach to your Wi-Fi access point. There are two methods for doing this: 1. Access Point By def ...

XW-110/XW-111 WiFi™ Users Manual to the DHCP server so you can obtain the IP address that was assigned. To begin, press the WPS button on your wireless router or access-point. You will generally have about two minutes to connect wireless devices to the network with WPS. Now remove the cover of the XW-11x and press the “WPS” push ...

Installation and Setup 2.5 Application Examples The XW-11x can be configured for many different applications. Applications which require long battery life require careful planning and setup. Six examples are described below: Greenhouse Temperature Example You wish to activate a warning light and receive an email if the te ...

XW-110/XW-111 WiFi™ Users Manual Warehouse Temperature Example with no Access Point You wish to monitor the temperature of a warehouse with a your smart phone. You don't have a WiFi access point. Mount an XW-110 inside the warehouse. Power it with a DC wall adapter because the Access Point mode requires more power than the batteries ...