Dared VP-845LE Operation & User’s Manual

Text of the manual

Thanks you for purchasing this unit, brand-name Dared Vacuum

Tube Amplifier. For Optimum performance and safety, please read this manual carefully and properly keep these manual handy for future reference. Table of Contents: Page 1. Safety Instructions................................................................1 2. Feature.................

Please switch OFF the units and make it cool enough then clean the

dust on the surface of the product with soft brush or dry cloth periodically. When cleaning the vacuum tube please gently shake the tube and take it down, install the tubes in the same way after clean. Do not attempt to clean the unit with chemical solvents: this might dam

13. When the product is moved from coo, to warm place, the dew will

coagulate on the surface of vacuum tube, in this circumstance please patiently wait at least 1 hour to operate the unit to avoid of leakage or blowout of the vacuum tube due to sudden hot. 14. Grounding or polarization – Precautions should be taken so that the grounding or polarization

Connect firmly and securely, make sure that both the audio components

and amplifier are properly ground. Always turn off the power switches of both units when connecting or disconnecting the power and amplifier. b) Connecting Speakers: Connect a SPEAKERS system having an impedance of 4ohm to 8ohm provided on the rear panel. Please connect the SPEAKERS te

3. Front Panel and Controls

1. POWER switch/indicator (POWER) Press this switch to switch ON the power. The indicator will illuminate while the power is ON. Press the switch again, to switch off the power. Attention: It only can be restarted after 5 minutes when being switch off, or it may be damage the tubes. Note the following cauti

Other Amplifier Manuals