Siemens SIPROTEC 5 Technical Data Manual

High-Voltage Bay Controller 6MD85/86 Technical Data Extract from manual C53000-G5040-C015-A, chapter 11 Energy Automation ...

Disclaimer of Liability This document has been subjected to rigorous technical review before being published. It is revised at regular inter- vals, and any modifications and amendments are included in the subsequent issues. The content of this ...

This manual describes the functions of SIPROTEC 5 high voltage bay controllers. Target Audience Protection system engineers, commissioning engineers, persons entrusted with the setting, testing and main- tenance of automation, selective protection and control equipment, and operational crew in electrical installa- tions and powe ...

The Communication protocol manual contains a description of the protocols for communication within the SIPROTEC 5 device family and to higher-level network control centers. • Product information The Product information includes general information about device installation, technical data, limiting values for input and out ...

Support Our Customer Support Center provides a 24-hour service. Phone: +49 (180) 524-7000 Fax: +49 (180) 524-2471 E-Mail: [email protected] Training Courses Inquiries regarding individual training courses should be addressed to our Training Center: Siemens ...

² Comply with all instructions, in order to avoid property damage. ii NOTE Important information about the product, product handling or a certain section of the documentation which must be given particular attention. Qualified Electrical Engineering Personnel Only q ...

The product contains, among other things, Open Source Software developed by third parties. The Open Source Software used in the product and the license agreements concerning this software can be found in the Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those license conditions will entitle ...

1105 11.2 Protection Interface and Protection Topology 1114 11.3 Date and Time Synchronization 1116 11.4 Automatic Reclosing 1117 11.5 Phasor Measurement Unit 1118 11.6 Circuit-Breaker Wear Monitoring 1119 11.7 External Trip Initiation 1120 11.8 Overcurrent Protection, Phases 1121 11.9 Overcurrent Protection, Ground 11 ...

1210 11.43 Voltage Phase-Rotation Supervision 1211 11.44 Trip-Circuit Supervisi ...

Analog Inputs Voltage Input All current, voltage, and power data are specified as RMS values. Rated frequency frated 50 Hz, 60 Hz Input and output modules IO202, IO208, IO211, IO214 IO215 Measuring range 0 V to 200 V 0 V to 7.07 V Input impedance < 0.1 VA < 0.01 VA Thermal rating 230 V continuously 20 V continuously Measuring-Transducer I ...