Valhalla 4100 SERIES Operation Manual
Text of the manual
Valhalla Scientific, Inc.
4100 SERIES
DIGITAL OHMMETER
OPERATION MANUAL
8318 Miramar Mall
San Diego, CA 92121
P: 858/457-5576
F: 858/457-0127
W: www.valhallascientific.com
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
®
E
s
ta
blished 1
9
8
1
VALHALLA SCIENTIFIC INC. CERTIFICATION
Valhalla Scientific, Inc. certifies that this instrument was thoroughly tested and inspected and found to
meet published specifications when shipped from the factory. Valhalla Scientific, Inc. further certifies
that its calibration measurements are traceable to the Nation Institute of Standards and Technology to
the
All Editions and Updates of this manual and their creation date are listed below. The first Edition of
the manual is 1. The Edition Number increments by 1 whenever the manual is revised. Updates,
which are issued between Editions, contain replacement pages to correct or add additional information
to the current Edition of the manua
The following general safety precautions must be observed during all phases of operation, service, and
repair of this product. Failure to comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the product. Valhalla
Scientific assumes no liability for t
Chapter 1 General Information
7
Introduction
7
Manual Description
7
Instrument Description
8
Instrument Identification
8
Chapter 2 Unpacking & Installing 9
Inspection
9
Line Voltage / Fuse Selection
9
Bench Use
9
Rack Mounting
9
Safety Considerations
10
Chapter 3 Specifications
11
General
11
Accuracy
11
General Specificat
Chapter 12 Addendums
42
Addendums
42
Chapter 13 Parts List
43
4100ATC Main Board Assembly
44
4150ATC Main Board Assembly
47
Final Assembly
51
4100/4150 Display Bd. Assembly
52
4165 Clamp PCB Assembly
53
4165-1344 Main Board Assembly
54
4165-1344 Clamp PCB Assembly
58
Option BCD Interface Assembly
59
Chapter 14 Schematics/Drawings 60
4100-074
1 of 4
a
4100-07
This manual has information to perform Inspection, Installation, Measurement Operations, and
Troubleshooting for Valhalla Scientific 4100 Series. Also included in this manual are:
Specifications, Parts Lists and all Schematics.
The following instruments are part of the 4100 Series Ohmmeters: 4100ATC, 4150ATC, 41
Chapter 13 – Parts List
Chapter 13 contains all parts used in the
assembly and sub assembly of any 4100 Series
Ohmmeters. The parts are listed with a
Reference Designator, Valhalla Part Number,
Description, and Manufacturers Part Number.
Chapter 14 – Schematics
Chapter 14 contains all schematics and drawings
for Valhalla 4100 Series Ohmmeters.
Instrume
Unpacking and Installing
Inspection
If the shipping carton is damaged, request that the carrier's agent be present when the unit is
unpacked. If the instrument appears damaged, the carrier's agent should authorize repairs before the
unit is returned to the factory. Even if the instrument appears undamaged, it may have suffered
inter