FCCID MBT-A120 Manual 

EN Model No.: MBT-A120 Model No.: MBT-S120 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any ...

EN posed at EU. Elektro- ene e, tèmes roduit. a fine del . o no oducto. Dit symbool op het product of de handleiding betekent dat u elektrische en elektronische apparatuur aan het einde van de levensduur, gescheiden van huishoudelijk afval moet weggooien. Er zijn afzonderlijke inzamelsystemen voor recyclage in de EU. ...

Model No.: MBT-S120 This device complies with part 15 of the FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifi cations not expressly ...

--Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifi cations not expressly approved by the grant ...

EN Identifying the Parts Headset 1 LED Indicator 2 Power Switch 3 Behind-the-neck Band 4 DC-In Jack 5 Microphone 6 Talk/Pairing Button 7 Volume Up Button 8 LED Indicator 9 Stop Button 10 Volume Down Button 9 10 6 1 2 5 4 5 4 3 2 1 Dongle 1 Strap Holder 2 Audio-In Connector 3 Power Switch 4 DC-In Jack 5 LED Indicator 6 ...

4 EN Pa 1 Pr bu sli 2 Po th 3 Re fla th 4 Th wh pa Note: If the pa repeat • Connect the split ends of the supplied AC adapter (5V/0.5A) to the DC-IN jacks of the headset and the dongle. Connect the other end to a wall outlet. • The LED indicator will light RED when charging. • The LED indicator will TURN OFF when ...

5 EN Pairing the Headset and Dongle 1 Press and hold the TALK/PAIRING button on the headset and then slide the power switch to power it on. 2 Power on the dongle and then press the PAIRING button to start pairing. 3 Release the buttons when the LEDs flash red and blue alternatively. (Now they are in pairing mode.) 4 Th ...

6 EN Pa Ph 1 Pr bu po 2 Re fla 3 Th m bl 4 Us st de 5 Se ph fo 6 Th en 7 Th on th su Make sure the headset and dongle have been paired successfully before playing music. 1 Connect the dongle’s AUDIO-IN connector into a music player, walkman or CD player. 2 Power on the dongle, headset and music player. 3 Play the mus ...

7 EN Pairing the Headset and a Mobile Phone 1 Press and hold the TALK/PAIRING button on the headset and then power on the headset. 2 Release the button when the LED flashes red and blue alternatively. 3 The headset is now in pairing mode and is ready to pair with your bluetooth mobile phone. 4 Use your bluetooth mobile ...