Faraday 8701 Installation Instructions And Wiring

Text of the manual

PAGE 1 OF 2

P/N 315-049480FA-2 Figure 1 8701 Module The 8701 contact monitoring module interfaces direct shorting devices to the System’s Addressable Device Circuit. The 8701 can monitor a normally open or closed dry contact and it can report the status of the contact. PROGRAMMING Refer to Figure 1 to locate the red and black Addressable Device Circuit wir

PAGE 2 OF 2

P/N 315-049480FA-2 Figure 2 Installing the 8701 Wiring NOTES: 1. All supervised switches must be held closed and/or open for at least a quarter of a second to guarantee detection. 2. End of line device: 470 ohm, 1/4W resistor, P/N 140-820164. 3. 8701 is polarity insensitive. Line 1 and Line 2 can be either line of the loop. 4. The supervised swit

Other Control Unit Manuals