Echogear EGLF1 Instruction Manual

Text of the manual

EGLF1 INSTRUCTION MANUAL

We’ll Make It Stress-Free If you have any questions along the way, contact us at www.echogear.com. We’re ready to help!

CAUTION: IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS

Before getting started, let’s make sure this mount is perfect for you! Does your TV (including accessories) weigh MORE than 132 lbs. (59.8 kg)? No? Perfect – you may continue. Yes? This mount is NOT compatible.

SIDE VIEW - EXTENDED

2.6 in. [66mm] SIDE VIEW - RETRACTED 15° TILT DOWN 5° TILT UP 65° 65° TOP VIEW - EXTENDED 15.7 in. [400 mm] 23.6 in. [600 mm] 5.9 in. [150 mm] 3.9 in. [100 mm] TV INTERFACE 8.9 in. [226 mm] 10.2 in. [258 mm] 17.1 in. [435 mm] 7.6 in. [194 mm] 5.6 in. [152 mm] 16.0 in. [407 mm] WALL PLATE SIDE VIEW Dimensions

M8 x 25mm

M8 x 50mm M4 x 12mm M6 x 12mm M8 x 16mm M4 x 35mm M6 x 35mm M8 x 35mm 2.5mm 22mm M 4 / M 5 M 6 / M 8 NOTE: Not all hardware included will be used. WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do n

1-1 Select TV Screws

1-2 Spacers? M4 M6 M8 a b Long Screw Short Screw Washer Washer Spacer Bracket Bracket Screw

1-3 Attach the TV Bracket

a Screw and washer b Spacer(s), screw and washer CAUTION: Ensure TV brackets are securely fastened before moving on to the next step. Alternate Setups 12 10 11 13 02 06 10 11 03 07 04 08 05 09 01

5/16 x 2¾ in.

STEP 2 Parts and Hardware Wall Plate/Arm Lag Screws Lag Screw Washers Anchors 14 x1 15 x4 16 x4 17 x4 STEP 2 Attach Wall Plate / Arm to Wall For wood stud installations, follow STEP 2A on PAGE 8 For concrete installations, follow STEP 2B on PAGE 11 Fischer UX 10 x 60R

Wood Stud Option

1 2 3 Max. 5/8 in. (16 mm) Min. 16 in. (406 mm) Min. Wood Stud Size: nominal 2 in. (51 mm) actual 1 1/2 in. (38 mm) Min. Wood Stud Size: nominal 4 in. (102 mm) actual 3 1/2 in. (89 mm)

3 in. (75 mm)

7/32 in. (5.5 mm) 15 16 14 6 7 Go to STEP 3 on PAGE 13. CAUTION: Avoid potential personal injury or property damage! All four lag screws 15 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

Other Racks & Stands Manuals