Denso BHT-700-WM Reference Manual

Text of the manual

Copyright © DENSO WAVE INCORPORATED, 2009

All rights reserved. No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without prior notice. All products and company names mentioned in this manual are trademarks or registered trademarks of their respecti

Added “Operating Precautions”

Modified following parameters of functions. - GetSIMPINPUKCounter - SetNecessarySIMPIN - SetRadioBand - GetOperatorInfo - SendSMS 3.0 September, 2009 Added “1. Programing”

This reference manual is intended for software developers using VB.NET or C# to develop software applications using

GPRS(EDGE) functions for the BHT-700. ¾ Operating Precautions When you develop software applications using GPRS(EDGE) functions, you need to copy GPRSLIB.dll supplied with GPRS Class Library to a Windows folder of BHT-700. Otherwi

1. Programing .........................................................................................................................................................................................1

2. GPRS class.........................................................................................................................................

- 1 -

1. Programing Procedure for GRPS's connection Step1 : Insert SIM card into BHT Step2 : Power on GPRS module. use "PowerOn" method Step3 : Open COM port to send a control command to the GPRS module. use "OpenCom" method Step4 : Check the authentication status of SIM PIN authentication. use "GetSIMPINStatus" method Step5 : Input PIN code If PIN code is n

- 2 -

2. GPRS class ¾ Constructor There is no need to create an instance because all the members are static members ¾ Methods Method Name Description PowerOn Turn ON GPRS module PowerOff Turn OFF GPRS module OpenCom Open GPRS COM port CloseCom Close GPRS COM port GetSIMPINStatus Get the SIM PIN authentication status GetSIMPINPUKCounter Get the number of at

- 3 -

PowerOn Turn the power of GPRS module on. ■ Syntax [VB] Public Shared Function PowerOn() As UInt32 [C#] public static UInt32 PowerOn(); ■ Return value error code 0 : Normal end Other than 0 : Abnormal end. For more detail, refer to 7. error code.

- 4 -

PowerOff Turn the power of GPRS module off. ■ Syntax [VB] Public Shared Function PowerOff() As UInt32 [C#] public static UInt32 PowerOff(); ■ Return value error code 0 : Normal end Other than 0 : Abnormal end. For more detail, refer to 7. error code.

Other Barcode Reader Manuals