Gemalto Cinterion LGA DevKit Operation & User’s Manual

RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCTS DESCRIBED HEREIN. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT THE DISCRETION OF GEMALTO M2M. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. GEMA ...

Contents 28  lga_devkit_ug_v02 2019-05-27 Preliminary Page 3 of 28 Contents 1 Introduction ................................................................................................................. 5 1.1 Feature and Benefits.......................................................................................... ...

Contents 28  lga_devkit_ug_v02 2019-05-27 Preliminary Page 4 of 28 9 Package Content....................................................................................................... 21 10 Appendix.................................................................................................................... 22 ...

1 Introduction 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 5 of 28 1 Introduction The Cinterion® LGA DevKit is designed as a generic development adapter for Cinterion® LGA modules. With the LGA DevKit it is no longer necessary to connect the Cinterion® evaluation modules to an adapter for test and development pur ...

2 Quickstart 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 6 of 28 2 Quickstart Please complete the following steps to quickly get started with your LGA DevKit. • Mount the LGA DevKit Socket onto the LGA DevKit (for details see Section 2.1). • Insert the fixing frame and then the module into the Socket and close t ...

3 LGA DevKit Overview 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 7 of 28 3 LGA DevKit Overview 3.1 Top and Bottom View Figure 1: LGA DevKit top view Figure 2: LGA DevKit top view ...

3.2 Block Diagram 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 8 of 28 3.2 Block Diagram Figure 3: LGA DevKit block diagram Jumper PWR Jumper Jumper Signal Jumpers Jumper Switch ASC0 Power Switch FTDI Serial – USB Bridge Auto Adjust Levelshifter Left side: Module Pins Right side: Peripherals Cinterion® In ...

4 LGA DevKit Interfaces 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 9 of 28 4 LGA DevKit Interfaces 4.1 USB The LGA DevKit comes with two USB interfaces supporting power supply and serial commu- nication. You may choose to setup communication via a module's USB port and/or a module's UART (ASC0) port via FTDI232R VC ...

4.3 Pin Headers 27  lga_devkit_ug_v02 2019-05-27 Preliminary Page 10 of 28 4.3 Pin Headers The pin headers at the head of the LGA DevKit's top side can be used to setup connections between modules and possible on board peripherals. Thus, pin headers having signal names at their left side only, namely the pin headers AUDIO ...