Focus V3 Operation & User’s Manual
Text of the manual
This guide will teach you how to use your Foc.us V3 brain stimulator.
If you are new to brain stimulation you may be nervous. Don’t be. Right now your brain is full of
electrical flows.
Stimulation simply lets you alter those flows a little. Read the warning below and provided
you have none of the listed contra-indicat
YOUR FOC.US V3
Understand the different parts included with your V3 brain stimulator.
●
●
Always store your V3 in the supplied case when not in use. Squeeze any excess liquid from
the sponges and place them in the electrodes. Ensure the lid of the supplied water bottle is
tightly closed before returning to its place.
●
●
The silicone electrodes can b
Included with V3.......................................................................................................... 3
Navigating your V3 ...................................................................
NAVIGATING YOUR V3
5
PRESS to turn ON
PRESS the blue joystick to turn on and start.
Navigate your Foc.us V3 with the blue joystick.
Use DOWN to select TAKE CHARGE
PRESS to start your journey
1.
Value & Labels
This shows that the current current setting is 1.5mA.
Use LEFT to reduce or RIGHT to increase this value.
Then PRESS or DOWN to proceed to next setting
V3 ELECTRICAL BRAIN STIMULATOR
6
Your Foc.us V3 is an electrical neuro-stimulator which will deliver a controlled current to your
brain.
The theory of transcranial Electrical Stimulation (tES) is that by passing a current through
your brain, the excitation levels of your brain cells are altered. The delivered current is small
compared to the current that is
QUICK START GUIDE
7
Prepare Electrodes
Position the amx-y electrodes with wet sponges in the
headband and place headband on head.
Liberally wet the sponges before use.
1.
Start a Program
A program defines the target current, duration and
mode settings to be used in a stimulation session.
V3 ships with 7 Programs:
Ripple, 3rd eye, wave, pulse, Noise, eDream &
The effects of tES depend on the positioning and polarity of the electrodes. Anodal stimulation
induces an increase in cortical excitability under the X electrode. Cathodal stimulation induces
an increase in cortical inhibition under the Y electrode. When electrodes are placed on the
shoulder or arm, the exact location is less importan
ELECTRODE SETUP DETAILS
9
Wet sponges in amx-y
Headband On Head
To pass an electric current through your brain an electrical
circuit must be setup between the device, cable, electrodes,
sponges and you.
Sponges should be wet. Use the small water bottle to keep
water handy. Be careful not to touch the black silicone as
this can result in electrical burns.
Pla
V3 STIMULATION MODES
What is a mode?
The mode describes the shape of the electrical signal. At a minimum V3 includes tDCS, tACS, so-
tDCS, tPCS, tRNS and tRCS modes.
Each mode has a set of parameters that control the shape of the electrical output.
During a stimulation session the display of the V3 functions as an oscilloscope. It shows the real-
time curre