DeWalt Flexvolt DCV585 Instruction Manual
Text of DeWalt Flexvolt DCV585 Instruction Manual
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT
DCV585
60V Max* FLEXVOLT™ HEPA Dust Extractor
Extracteur de poussière HEPA FLEXVOLTMC 60 V max*
Extractor de Polvo FLEXVOLT™ HEPA 60 V Máx*
Instruction Manual
Guide D’utilisation
Manual de instrucciones
DeWALT
all-guides.
com
English (original instructions)
1
Français (traduction de la notice d’instructions originale)
15
Español (traducido de las instrucciones originales)
32
1 Battery port
2 Dust extractor hose
3 Three position switch
4 Tank latch
5 Hose clip
6 Dust extractor head
7 Battery pack (not
included in the
DCV585B)
8 Battery release button
9 Hose inlet plug
10 TSTAK® Stacking latch
11 Wireless Tool Control™
pairing button
12 Fleece bag
13 Handle
14 Wireless Tool Control™
remote
15 Hose release latch
Definitions: Safety Alert Symbols and Words
This instruction manual uses the f
Supplemental Safety Warnings for Dust
Extractors
•
This dust extractor meets the EPA lead-related
Renovations, Repair and Painting (RRP) Rule for HEPA
vacuum only when used with the two DC5151H HEPA
Filters. (included with DCV585).
Contact the United States Environmental Protection Agency
(EPA) for more information on their Renovations, Repair and
Painting (RRP) Rule.
•
This dust extractor is approved for use in OSHA Silica
1926.1153 dust
BATTERIES AND CHARGERS
The battery pack is not fully charged out of the carton.
Before using the battery pack and charger, read the
safety instructions below and then follow charging
procedures outlined. When ordering replacement battery
packs, be sure to include the catalog number and voltage.
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V..........................volts
Hz.......
any way (e.g., pierced with a nail, hit with a hammer,
stepped on). Damaged battery packs should be
returned to the service center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
NOTE: Battery packs should not be
Important Safety Instructions for All
Battery Chargers
WARNING: Read all safety warnings,
instructions, and cautionary markings for the
battery pack, charger and product. Failure to
follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
•
DO NOT attempt to charge the battery pack with
any chargers other than a DeWALT charger. DeWALT
charger and battery pack are specifically designed to
work together.
battery pack in the cavity. Unplug the charger before
attempting to clean.
Charging a Battery
NOTE: To ensure maximum performance and life of lithium-
ion battery packs, charge the battery pack fully before
first use.
1. Plug the charger into an appropriate outlet before
inserting battery pack.
2. Connect the charger and battery pack, making sure
the battery is fully seated. The (charging) light will
blink continuously indicating that the ch