Devine D-Series Operation & User’s Manual
Text of Devine D-Series Operation & User’s Manual
D-series (D-200, D-400, D-600)
digital class D power amplifiers
User manual
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 02-06-2014 RV
Revision date + author initials: 02-06-2014 RV
This unit must be operated by, or under the supervision of an adult. This device is not suitable for children.
Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual
- Make sure there is no damage caused by transport. If the device seems damaged from the outside, do not
use it and contact your dealer for more information and consultation.
- To
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable
items.
- Always disconnect the device when it is not in use for a longer period of time, when servicing is needed or
when the device needs cleaning.
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its socket,
as this could lead to damage and electrical shocks.
- Always operate this device with a stable AC
- Do not bridge the fuse with electrical wires, aluminum foil, as the fuse is used for protection against
electrical shocks and short circuit.
- Always mount the fuse cover back to the fuse compartment.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 02-06-2014 RV
Revision date + author initials: 02-06-2014 RV
Guidelines for speaker systems
- Avoid exposure to high sound pressure levels for a longer period of time. See the charts on this
page for more information about sound pressure levels and exposure to high levels.
Continuous dB
Permissible exposure time
85
8 hours
88
4 hours
91
2 hours
94
1 hour
97
30 minutes
100
15 minutes
103
7.5 minutes
106
3.75 minutes (<4 minutes)
109
1.875 minutes (<2 minutes)
112
0.9375 minutes (<1 minute)
115
0.46875 minutes (+/- 3
Thank you for purchasing this Devine amplifier. To make sure you use this product as intended and for
optimal performance and protection of this device, Devine recommends you read this user manual.
The Devine D-series amplifiers consist of several high quality power amplifiers. The D-series are digital class
D power amplifiers, with a digital amplifier circuit installed. Thanks to this technology, the D-series are very
compact, lightweight and
1. Volume controls
2. Signal LED indicator
3. Limiter LED indicator
4. Power LED indicator
5. ON/OFF switch
6. Rack mount brackets
7. Ventilation slots
8. Ground lift switch
9. Mode switch
10. Signal input section (Balanced XLR / 6.35 mm TRS jack)
11. Cooling fans
12. Speaker output section (Speaker-lock)
13. Power input connector + fuse holder
14. AC voltage switch 100 / 240V
Any information and illustrations shown in this user manual are
Use of the amplifier
The Devine D-series amplifiers are built to last. To be able to get the most out of your speaker system, it is
recommended to read this section thoroughly, to become familiar with all the options and features of this
amplifier. Correct use of the amplifier will ensure that the expected lifespan of the amplifier remains
unchanged, as overload of this power amplifier may result in defects of your power amplifier and/or speaker
system.
Po
2. Make sure that after you checked step 1, the amplifier volume controls are carefully turned up as far as
possible.
WARNING:
When increasing the volume controls of your amplifier, always listen carefully to the connected
speakers and keep an eye on the clip indicators of your amplifier. You need to decrease the volume level of
the amplifier channels when any of the following situations are noticed:
- Amplifier channel Clip LED lights up frequently
- Spe
MP3-player or smartphone) directly, as it is not possible to see if the signal is below or above the 0dB line.
However, it is possible to connect such a device to an audio mixer, to be able to see how high the outgoing
volume level of your device is set.
The inputs of this power amplifier may be used as 'signal pass' connections, to be able to connect multiple
amplifiers in a daisy chain setup. Devine recommends to link no more than three D-series power am