Fast Mover FT1010 Instruction Manual

FT1010 Air Operated 150mm Orbital Sander Product Instruction Manual PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE ...

designed for the purpose of sanding a variety of coatings from steel, wood, plastics, etc. FT1010 Instruction Manual Fast Mover Tools T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com IMPORTANT Please read through this Manual carefully before using the FT1010. This tool must only be used for sanding and within the parameters outlined in this manual. All users of the equipment should be trained in any risks associated with the products they are sanding or using as finishing aids. Specification Pad Diameter 6”/150mm Orbit 3 or 5mm Pad Thread Size 5/16” Free Speed ...

The sanding process will create dust and other airborne particles. There is a dust extraction function on this machine but it is still essential that approved eye and breathing protection is worn to protect users in the event of unintentional disconnection or damage of the bag or hose. Noise and Ear Protection Depending on the material being worked on and the type of sanding disc used, noise levels may cause hearing damage including temporary or even permanent hearing loss. It is recommended that Ear Protection is worn at all times when using the sander. Repetitive Strain Injury (RSI) All products of this nature can cause ...

T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com Fig. 1 Air Filter/Regulator /Lubricator Whip Hose Airline Air Fitting Quick Release Air Coupling To Air Tool Fig. 2 We recommend that your air tool is connected to the main airline in the way displayed in Fig. 2. 1: Air Tool 2: Whip Hose/Leader Hose 3: Air Fitting 4: Quick Coupling 5: Main Air Hose 5 1 4 3 2 Air Source Familiarise Yourself with the Controls 1 The throttle is pressure sensitive. Applying pressure will increase rotational speed. 2 Removal of all pressure will stop the machine. 3 Your tool comes with a Regulato ...

Fast Mover Tools T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com 4 It is strongly advised that you always use a Whip Hose/Leader Hose in combination with Quick Release Couplings. See Fig. 2 for recommended setup. 5 Water in the air supply will cause the internal bearing of the tool to rust and eventually seize. 6 Make sure that your airline is free from water at all times. 7 Always select the correct sanding disc grit for the job. Tools Included with your Sander 1 x High Flow Male Air Fitting Vacuum Hose Fitment Maintenance 1 If the air supply is not lubricated su ...

T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com No. Description Q’ty 1 Valve Lever 1 2 Spring Pin 1 3 Housing Cap 1 4 Housing 1 5 Bearing 1 6 Spring Pin 1 7 Rear Plate 1 8 Cylinder 1 9 O-ring 1 10 Rotor Blade 5 11 Rotor 1 12 Front Plate 1 13 Bearing 1 14 O-ring 1 15 Nut 1 16 Snap Ring 1 17 Rotor Key 1 18 Motor & Shaft Balancer 1 19 Bearing & Pad Retainer 1set 20A NA 1 20CS Sleeve 1 21D 6” Velcro Pad 1 22 Regulator Lever Set 1 23 Snap Ring 1 24 Valve Tappet 1 25 Washer 1 26 Adjust Shaft 1 27 Compression Spring 1 28 Adaptor 1 29 Silencer 1 No. Description Q’ty 29S NA ...

Fast Mover Tools T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com Warranty We hope that you will be very happy with your purchase. If you do have a problem with your tool, you have the added peace of mind of a 6 month warranty, which comes into date from the date of purchase (proof of purchase required). Scope of Warranty - The warranty will cover you from all faults caused by defective components or poor workmanship. - Tools sent outside the EU are not covered by this warranty. - Product must be returned to us, the warranty does not cover cost of carriage. - If th ...

T: 01582 661993 F: 01582 667100 E: [email protected] www.fastmovertoolsuk.com Declaration of Conformity We declare that the equipment detail below, to the best of our knowledge and ability, complies with the following Directive. Machinery Directive - 2006/42/EC and amending Directives Equipment Description Air Operated Orbital 6” Palm Sander Part Code FT1010, FT1010/5MM, FT1010-V Distributed in the EU by Fast Mover Tools Address Unit 1 Frenchs Avenue Dunstable Bedfordshire LU6 1BH United Kingdom The following Transposed Harmonised Standards have been applied in the design and construction of this eq ...