Echogear EGAV1 Instruction Manual
Text of the manual
DO NOT EXCEED 6.8 kg (15 lbs.) for this shelf.
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS
Weight Restrictions
Please read through these instructions completely to be sure you’re comfortable with this easy
install process.
If you do not understand these instructions or have doubts about the
[1/4 in. Drive]
10 mm
(3/8 in.)
[1/4 in. Drive]
10 mm
(3/8 in.)
Wood Stud Install
Concrete Install
Drywall Install
Pencil
Level
Phillips
Screwdriver
Tape
Measure
Electric Drill
3
Grab Your Tools
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and undamaged.
If any parts are missing or damaged, do not return the damaged item to your dealer;
contact Customer Service. Never use damaged parts!
Parts FOR STEP 1
What’s in the Box
01 x 1
Wall Plate
x 2
03
06 x 2
07 x 1
Shelf
End Caps
(Wall Plate)
NOTE: Not all hardware included in this kit will be used.
Parts FOR STEP 2
x 2
08
M6x12 mm
You're ready! LET’S DO THIS!
edges with a
stud fi nder ...
...and/or probe
with an awl or a
small drill bit.
6
Find a Stud
Mark Holes
STEP 1A.1
STEP 1A.2
STEP 1A
Install the Wall Plate
(For Wood Stud)
01
70 mm (2¾ in.)
Bit
If needed,
use a 10 mm
(3/8 in.) socket
[thin-wall or 1/4
in. drive socket]
7
Drill Holes
Secure Wall Plate
STEP 1A.3
STEP 1A.4
Go to STEP 2
on PAGE 12
01
02
Install the Wall Plate
(For DRYWALL)
10 mm
(3/8 in.)
25 mm (1 in.)
Bit
8
Mark Holes
Drill Holes
STEP 1B.1
STEP 1B.2
01
Go to STEP 2
on PAGE 12
IMPORTANT:
DO NOT use
power tools
for this step.
9
Insert Anchors
Secure Wall Plate
STEP 1B.3
STEP 1B.4
03
01
04