Doss L Series Operation & User’s Manual

camera is professional, so please read the user manual carefully before using the camera. ...

for solutions. We will update the content for the new functions without notice. 1 、 Installation Environment  Keep away from the places for high-temperature, heat source and direct sunlight;  Keep away from water and when get wet, cut off the power immediately.  Avoid using at damp environment; the reference range for operation humidity is below 85%RH. � ...

Index 1 PRODUCT INTRODUCTION.................................................................................................. 4 1.1 PRODUCT SUMMARY............................................................................................................... 4 1.2 PACKAGE FOR TYPICAL PRODUCTION.................................................................................. 4 2 INSTALLATION GUIDE............................ ...

Appendix：L series IP camera parameters comparison list........................................................ 18 1 Product introduction 1.1 Product summary Thank you for choosing our company’s L series IP camera, the IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. It is ...

5V √ √ √ √ Built-in Notice:  Please check carefully if all listed items are included in the package, if anything missing, please contact vendor in time. 2 Installation guide 2.1 AP connection Power on the camera (Please check carefully output voltage of power adapter, don’t insert incorrect adapter, otherwise it will damage the camera), after 2 minutes, the camera works normally. You can use PC or mobile phone to ...

2.2 Wired connection to LAN Power on the IP camera, connect IP camera to router by network cable, meanwhile, connect computer to the same router, example of figure 2. Figure 2 Insert CD to computer driver, double click “LSearch_en.exe” in the CD, run the software, click “Search”, select the device searched, click “Browse” to open browser, it will pop up user login dialog, enter default user name(admin) and passwor ...

choose not to block.  You can hold on reset button on the camera for 10 seconds to restore factory default if you forget user name and password, during the process, don’t disconnect the power, otherwise the camera maybe damaged. 2.3 WIFI connecting to LAN You can connect the camera with router by wireless connection, as figure 4. Figure 4 Before connecting router by wifi, please connect them as chapter 2.2 to Login camer ...

Enter the Wireless LAN Setting, click the “Scan” button, it will show you all the wireless networks detected in the Wireless Network List column. Select one of them and tick “Using Wireless Lan”, then the relevant data of the selected wireless network will be shown in the following blanks. Input the password and click “Submit”, then the WIFI setting is finished. Unplug the cable, then you can connect to router by ...

Figure 7 Operation Steps: 1) After login the interface of the router, choose “Port Forwarding” 2) Choose “Add custom Service” 3) Input IP camera http port 4) Input IP address of IP camera, click “Apply” After finishing the port forwarding, you can use WAN IP address of router and http port of camera to visit the camera by remote computer as figure 6. Notice: because the routers are different, so the interface and ...

3 Operation of IE browser 3.1 View video After installing the plug-ins, click “Mode 1 to view” as Figure 3 to view the video (video as Figure 8). Figure 8 1 ） Audio, Talk, Record, Snapshot You can click these buttons to perform audio, talk, record and snapshot functions. Note: about recording path, click button to enter setting interface, you 9 ...

can set it in “Local Recording Path”, as figure 9. Figure 9 2 ） Multipicture change button If you add multi-devices in chapter 3.4.2 “multi-device setting”, it will connect other device to display pictures automatically when changing to 4, 9 split screen. In playing video area, you can select a picture to control audio, talk, record, snapshot and PTZ control etc. 3 ） Viewing control area You can control PTZ moving ...

Figure 10 Remark ： Please carefully check the camera time, so it can be sure the alarm accuracy. 3.2.4 Local recording path The camera will be automatically create a file folder named “Record files” when the user don’t set “local recording path” and launch recording directly, and then save recording file to the folder, as figure 11. Figure 11 3.3 Device web setting 3.3.1 Basic network settings The user can also e ...

Figure 12 Remark: The router connected to camera need to enable DHCP when the user uses “obtain IP from DHCP server”; the routers enable DHCP by default. 3.3.2 AP settings Example of chapter 2.1, the user can directly connect to the camera by mobile phone and laptop with WiFi. The label with default AP SSID was sticked to bottom of the camera, the default password is 123456789. The user can change the SSID and password, ...

3.3.5 Third party DDNS setting User can also use third party DDNS, such as www.dyndns.com, User must apply a free domain name from this website and fill the info into the below blanks (Figure 15) and save the settings. Then the domain name can be used. Figure 15 Notice ：Using the third party domain name, if the http port is not 80, the port number should be adding to the domain name with colon. Example: http://btest.dyndns. ...

After triggering the alarm, you can adopt several alarm mode in armed time, example of figure 17.  Link to the Preset when alarming: need to set preset point of the camera;  Send alarm info by email ( a email include a picture); every alarm trigger a email;  Send the snap to the FTP server, user can also set the interval time between two pictures. Device only triggers alarm when it detects any motion in armed time. U ...

Figure 18 3.4.3 FTP Service Setting When alarming, the device will snap local picture and send them to FTP server, but need to set the FTP setting correctly. As figure 19, after the setting is finished, click “Test” to check your settings are correct or not. Figure 19 Notice ： For using the FTP function, you need to apply a user with authority that you can write and create submenu and some memory space. 3.4.4 Alarm log ...

Figure 20 3.5 User and device setting 3.5.1 Multi-device Setting As Figure 21, User can add maximum 9 devices to view video simultaneously. Click “refresh” button to check the device in the LAN. When click a device, will popup setting dialogue and enter the device info, and click “Add” to add device. After that, must click “Setup” button to save device. Figure 21 16 ...

3.5.2 User Settings Figure 22 3.5.3 PTZ settings Figure 23 Note: When you set cruise turns all the time, the camera will automatically stop after cruising one hour. 3.5.4 Maintain Figure 24 Click “Restore factory settings”, it will pop up a dialog to ask you if restore factory settings, the camera will restore factory settings and reboot after you confirmed. There are two types software in the camera, one is device firmw ...

4 Visiting device by other software 4.1 Other web browser Except IE browser, you can visit the camera by Firefox, Safari, Chrome, Opera browser etc., please select “Mode 2 to view”. 4.2 Mobile phone software For more information, please see the user manual for mobile phone in attached CD, or download the latest software and user manual in our website. 4.3 Centralization Control IPCMonitor is a free software offered by fac ...

5 Product family for L series 5.1 VGA Cube camera Figure 26 The camera adopts 300K pixels CMOS sensor, 3.6mm lens, built in MIC, 12 pieces IR LED, audio out socket. It uses 5V power adaptor. 19 ...