dji SPARK Operation & User’s Manual

2017.05 V1.0 User Guide 使用说明 使用說明 ユーザーガイド 사용자 가이드 Bedienungsanleitung Guía de usuario Guide de l'utilisateur Guida dell'utente Gebruiksaanwijzing Manual do utilizador Guia do usuário Руководство пользователя ...

30 Guide de l'utilisateur 35 Guida dell'utente 40 Gebruiksaanwijzing 45 Manual do utilizador 50 Guia do usuário 55 Руководство пользователя 60 C ...

Hub (hereinafter referred to as 'Product'). Read this disclaimer carefully before using this Product. By using this Product, you hereby agree to this disclaimer and signify that you have read it fully. Please use this Product in strict accordance with the manual and be sure ...

temperature range when in use. 4. The Charging Hub will intelligently limit the charging current if the battery temperature is low to prevent a hazard, which may prolong the charging time. 5. Place the Charging Hub on a flat and stable surface when in use. Ensure the device is properly insulate ...

Follow the instructions below to use the Charging Hub. Example: Spark Battery Charger (F1C50 Version 2). 1. Connecting to a Power Source Connect the Spark Battery Charger to a power outlet (100-240V 50- 60Hz), then connect the Charging Hub to the Spark Battery Charger. 2. Connecting the Batteries Align the battery with the Battery ...

before charging. DO NOT cover the Charging Hub when in use. Status LED Indicator Descriptions Status Light Description Pulsing Green Charging. — Solid Green Fully Charged. — Solid Red Power supply or battery error. Check components. — Solid Yellow Charging Hub connected correctly. Please ...

Spark Battery Charger (F1C50 Version 2) Compatible Battery Model MB1-1480 mAh-11.4 V Operating Temperature Range 32° to 104° F (0° to 40° C) Input Voltage 13.05 V Input Current 3.83 A Weight 67.2 g Charge Time* (Three Batteries) Spark Battery Charger (F1C50 Version 2): Approx. 90 minutes * Charging ...

7 CHS 免责声明 感谢您购买SPARK TM 智能飞行电池充电管家（以下简称“充电管家”）。 在使用充电管家之前，请仔细阅读本声明，一旦使用，即被视为对本 声明全部内容的认可和接受。请严格遵守本说明使用该产品，并务必 重视注意事项。因用户不当使用（包括但不限于� ...

8 CHS 部  件 1. 固件升级接口 （Micro USB） 2. 充电导轨 1 2 3 4 5 3. 电池接口 4. 状态指示灯 5. 电源接口 使用充电管家 参照如下步骤使用本产品，本说明以配合Spark 充电器（F1C50 Version 2）为例： 1. 连接电源 首先连接充电器到交流电源（100-240V， 50-60Hz），然后将充电 器输出� ...