LaMotte SMART3 Operator's Manual

Text of the manual

Packaging & Delivery ...................................................................................... 3

General Precautions ...................................................................................... 3 Safety Precautions .......................................................................................

Test Sequences ........................................................................................... 26

General Testing Procedures ........................................................................ 26 Testing With LaMotte Pre-Programmed Tests ............................................. 27 Calibrating LaMotte Pre-Progammed Tests ..........

PACKAGING & DELIVERY

Experienced packaging personnel at LaMotte Company assure adequate protection against normal hazards encountered in transportation of shipments. After the product leaves the manufacturer, all responsibility for its safe delivery is assured by the transportation company. Damage claims must be fi led immediately wit

LIMITS OF LIABILITY

Under no circumstances shall LaMotte Company be liable for loss of life, property, profi ts, or other damages incurred through the use or misuse of its products. WARRANTY LaMotte Company warrants this instrument to be free of defects in parts and workmanship for 2 years from the date of shipment. If it should become necessary to r

INSTRUMENT TYPE: Colorimeter

Readout 160 x 100 backlit LCD, 20 x 6 line graphical display Wavelengths 428 nm, 525 nm, 568 nm, 635 nm Wavelength Accuracy ±2% FS Readable Resolution Determined by reagent system Wavelength Bandwidth 10 nm typical Photometric Range –2 to +2 AU Photometric Precision ± 0.001 AU at 1.0 AU Photometric Accuracy

STATISTICAL & TECHNICAL DEFINITIONS RELATED TO

PRODUCT SPECIFICATIONS Method Detection Limit (MDL): “The method detection limit (MDL) is defi ned as the minimum concentration of a substance that can be measured and reported with 99% confi dence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given

5 Jeffery G. H., Basset J., Mendham J., Denney R. C., Vogel’s Textbook of

Quantitative Chemical Analysis, 5th ed., Longman Scientifi c & Technical, 1989, p. 130. 6 Jeffery G. H., Basset J., Mendham J., Denney R. C., Vogel’s Textbook of Quantitative Chemical Analysis, 5th ed., Longman Scientifi c & Technical, 1989, p. 130 CONTENTS AND ACCESSORIES CON

The SMART3 Colorimeter is an EPA-Accepted instrument. EPA-Accepted

means that the instrument meets the requirements for instrumentation as found in test procedures that are approved for the National Primary Drinking Water Regulations (NPDWR) or National Pollutant Discharge Elimination System (NPDES) compliance monitoring programs. EPA-Accep

Other Measuring Instruments Manuals