Kammer Tiny K Manual
Text of Kammer Tiny K Manual
Kammer Electronic Design UG (haftungsbeschränkt)
Kandelstr. 6, 79183 Waldkirch
Handelsregister: Freiburg i. Br. HRB 709873
Manual V1.00
The device Tiny K fulfills all relevant EG directives. Declaration of conformity
can be obtained from the manufacturer.
Kammer Electronic Design UG reserves the right to change the provided do-
cumentation without prior notification.
www.kammerelectronic.de
- 1 -
Attention! Important Advice
•
Read this manual before using the device.
•
The device may only be repaired by qualified personel. No user serviceable parts inside of the
main device nor the power adaptor.
•
Use high quality power supply cables with faultless isolation only!
•
The device must not be exposed to dust, moisture, water, direct sunlight or other sources of
heat. The device may not be operated if covered with dew.
•
The output may
Controls and Indicators
Channel LED
Indicates the active channel: Clean (green) or overdrive (red).
Boost LED
Indicates if the boost ist active.
Gain Control (Clean)
Adjusts the gain of the clean channel. Use this control to adjust the volume of the clean channel
to the volume of the overdrive channel. You can also generate beautiful crunch sounds with the
clean channel. The gain setting at which it starts to saturate depends on the output level of the
pic
- 3 -
Output
Connector for the cabinet. Use high quality cabinet cables only!
Power Supply
Connector for the power supply (24VDC, 2.0A).
Connect the Tiny K output to the cabinet before you turn it on.
Always use high quality cables to maximize signal quality.
A cabinet with 4Ω can be used also. No damage will occur neither at the amp nor the cabinet.
However, please be aware that in this setup not the complete output power can be accessed. If
the overcurr
- 4 -
Preamp
Tone Stack
FX-Loop
Power Amp
Input
Speaker
Send
Return
Volume
Gain OD / Clean
Bass
Treble
Block Diagram